Pelco C1300M-C (11/08) User Manual
24
C1300M-C (11/08)
LIMIT STOPS
Limit stops are programmable stops that limit the pan range of the unit. There must be two limits, a
left and a right, to define an area.
left and a right, to define an area.
There are two types of limit stops:
To set manual or scan stops:
1.
Use the joystick to position the cursor beside SET MANUAL STOPS or SET SCAN STOPS.
2.
Press Iris Open.
3.
Follow the directions displayed on the monitor.
NOTE: In order for the manual or scan stops to work, the LIMIT STOPS setting must be ON.
To clear manual or scan stops:
1.
Use the joystick to position the cursor beside CLEAR MANUAL STOPS or CLEAR SCAN STOPS.
2.
Press Iris Open.
3.
Follow the directions displayed on the monitor.
EXIT
LANGUAGE
ENGLISH
UNIT INVERSION
OFF
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<UNIT SETTINGS>
<POSITION CALIBRATION>
<DISPLAY SETUP>
<UNIT SETTINGS>
<POSITION CALIBRATION>
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
CYCLE CAMERA POWER
REBOOT SYSTEM
PELCO EXSITE IPSXM
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<WIPER>
<AUX>
<CLEAR>
<PASSWORD>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<WIPER>
<AUX>
<CLEAR>
<PASSWORD>
BACK
EXIT
EXIT
UNIT SETTINGS
PROPORTIONAL PAN
ON
PARK TIME (MINUTES)
0
PARK ACTION
NONE
SCAN SPEED (DEG/S)
25
PRESET FREEZE FRAME
AUTO
LIMIT STOPS
ON
<SET MANUAL STOPS>
<CLEAR MANUAL STOPS>
<SET SCAN STOPS>
<CLEAR SCAN STOPS>
<CLEAR MANUAL STOPS>
<SET SCAN STOPS>
<CLEAR SCAN STOPS>
<SET AZIMUTH ZERO>
<CLEAR AZIMUTH ZERO>
<CLEAR AZIMUTH ZERO>
BACK
EXIT
EXIT
REFERENCE INFORMATION
MANUAL LIMITS SET
MANUAL LIMITS SET
NO
SCAN LIMITS SET
NO
MOTION
MANUAL
A manual (joystick) pan operation stops when a limit stop is reached.
SCAN
The system reverses direction during random, frame, or auto scanning when a
limit stop is reached.
limit stop is reached.