Pelco C1300M-C (11/08) User Manual
44
C1300M-C (11/08)
Reset, Cycle Power, Reboot
RESET CAMERA
Use this function to reset all camera settings to factory default parameters.
NOTE: Reset camera restores all camera settings, except those associated with presets.
CYCLE CAMERA POWER
If the camera is not operating or if you lose camera control, cycle camera power. Cycling camera
power resets the camera but does not change any saved camera settings.
power resets the camera but does not change any saved camera settings.
REBOOT SYSTEM
Reboot the system if it is not operating if there is no control, or if the position of the unit has been
compromised. Rebooting the system will cycle pan and tilt and camera power without changing
programmed settings.
compromised. Rebooting the system will cycle pan and tilt and camera power without changing
programmed settings.
EXIT
LANGUAGE
ENGLISH
UNIT INVERSION
OFF
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<UNIT SETTINGS>
<POSITION CALIBRATION>
<DISPLAY SETUP>
<UNIT SETTINGS>
<POSITION CALIBRATION>
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
CYCLE CAMERA POWER
REBOOT SYSTEM
PELCO EXSITE IPSXM