Suunto VYTEC DS User Guide

24

• 

the Personal Adjustment setting on the 
left side of the center window with a 
diver symbol and + signs (P0, P1, or 
P2) (see Table 3.5.)

• 

the Diver Attention Symbol if attenuated 
RGBM has been set (see Table 3.3.)

•  blinking Diver Attention Symbol if 

surface interval should be prolonged 
(see Table 3.3.) 

In addition with the optional wireless transmis-
sion enabled:

•  the Remaining Air-time in the left 

center window

•  the cylinder pressure in bar [or psi] 

displayed in the lower left corner 

Alternative displays by pressing the TIME but-
ton (Fig. 3.9.):

• 

the current time, shown as TIME

• 

the water temperature in °C [°F]

NOTE! In Dive Mode the alternative display switch-
es back to the main display after 5 se conds.

It is possible to make special marks in the profi le 
memory during a dive. These Bookmarks will be 
shown as a dive log symbol when scrolling the 
profi le memory on the computer display. The 
Bookmarks will also be shown as annotations 
in the PC-software, Suunto Dive Manager. To 
make a bookmark on the profi le memory during 
a dive press the PLAN button (Fig. 3.10.).

When using the optional wireless pressure 
transmitter the pressure of your scuba cylinder 
in bars [psi] will be shown digitally in the lower 
left corner of the display  Anytime you enter 
into a dive, the remaining air time calculation 
begins. After 30 - 60 seconds (sometimes 
more,  depending on your air consumption), 
the fi rst estimation of remaining air time will be 

Fig. 3.10. Bookmark 
activation. An annotation, 
Bookmark, is placed 
in the profi le memory during 
a dive by pressing PLAN 
button. Note the Logbook 
symbol.

Fig. 3.11. A three minute 
Recommended Safety 
Stop.

Fig. 3.12. Cylinder pres-
sure warnings. Pressure 
has dropped below 50 bar 
[725 psi]. Pressure dis-
play is blinking and there 
is an audible alarm.