Suunto VYTEC DS User Guide

48

DIVE PROFILE MEMORY [PROF]

The scrolling of the profi le will start automati-
cally when the Logbook page IV (PROF) is 
entered.

With the default setting, the dive profi le is re-
corded and displayed in 20-second increments 
with each display being shown for about three 
seconds. The depths shown are the maximum 
values of each interval.

Pressing any button stops the scrolling of the 
profi le.

NOTE! Several repetitive dives are consid-
ered to belong to the same repetitive dive se-
ries if the no-fl ying time has not ended. See 
”Dive Numbering” in section 3.6.2. for further 
information.

The Dive History is a summary of all the dives 
recorded by the dive computer. To enter the 
Dive History Memory Mode select MODE- 1 
MEMORY- 2 HISTORY (Fig. 4.13.).

The following information will be shown on the 
display (Fig. 4.14.):

• 

the maximum depth ever reached

•  the total accumulated dive time in 

hours

• 

the total number of dives.

The Dive History Memory can hold a maximum 
of 999 dives and 999 diving hours. When these 
maximum values are reached, the counters will 
start again from zero.

NOTE! The maximum depth can be reset to 
0.0 m [0 ft] using the optional PC-Interface unit 
and Suunto Dive Manager software.

Fig. 4.15. Data Transfer 
mode. [3 TR-PC].

Fig. 4.16. Dive Simulation 
options. [2 SIMUL].

Fig. 4.14. Dive History 
information. Total number 
of dives, dive hours and 
maximum depth.