Suunto VYTEC DS User Guide

51

multiple gas mixes are set they will be changed 
as soon as allowed maximum depth is reached 
upon ascent and in the order of: MIX1, MIX2 
and MIX3

To enter the Dive Simulator mode select 
MODE- 2 SIMUL- 1 SIMDIVE (Fig. 4.17. and 
4.18.).

The Dive Planning Simulator mode shows you 
the present no-decompression limits. In this 
mode, you are also able to add the desired 
surface interval increment to present surface 
interval time, which allows you to plan your 
dives in advance.

This mode is also used to add the desired 
surface intervals for dive simulations. Add the 
desired surface interval increment to present 
surface interval by pressing the arrow down 
(TIME) and arrow up (PLAN) buttons. 

NOTE! This display is only shown for repeti-
tive dives.

To enter the Dive Planning Simulator mode 
select MODE- 2 SIMUL- 2 SIMPLAN (Fig. 
4.19.).

NOTE! The Dive Planning Simulator mode is 
disabled in Gauge mode and in Error mode 
(see section 3.9. ”Error Conditions”).

The Set Modes (Fig. 4.22.) are divided into 
three submodes for setting the dive-related 
parameters, time-related parameters and your 
personal preferences.

Fig. 4.20. Selected Dive 
Planning Simulator 
mode. Add desired 
surface interval incre-
ment (to present shown 
surface interval) by 
pressing TIME and PLAN 
buttons. This display is 
only shown 
for repetitive dives.

Fig. 4.21. Dive Planning 
Simulation.

Fig. 4.22.  Setting Op-
tions. [3 SET].