Coleman 2000007827 User Manual

Main Body Pole, black, long

Ridge Pole, black, short

2
1

5010000541
5010000541

5010000547
5010000547

1
2

STITCH LINE

t Insert one pin into one end of the pole. (Fig. 3 and 4)
t Go to opposite end of pole and carefully insert the pin into the 

other pole end. (Fig. 4)

t Repeat for all poles.

t Attach clips along the edges of tent to body poles. (Fig. 5)
t Make any adjustments to the tent stakes, if needed.

t Attach top ridge pole to underside of rainfly with straps and 

insert the tips of the top ridge pole into the pockets on underside 
of rainfly. (Fig. 6 & 7)

t Drape rainfly over tent. (Fig. 8)
t Connect the elastic loops with “S” hooks, (found at the rainfly 

corners) to the rings found at the tent corners. (Fig. 9)

t Secure rainfly with straps located on the underside of 

rainfly. (Fig. 10)

t Attach and stake out elastic cord at ground vent and 

guylines. (Fig. 8)

HINT: During setup, keep door zipped to keep proper tension
on fabric.

t Layout and position the tent with door facing desired 

direction. (Fig. 1)

t Stake down tent corners first through the stake rings. (Fig. 2)
t Keep the floor taut.
t Stake down the remainder of the stake rings.
t Assemble all poles by unfolding and interlocking the shock-

corded pole sections.

t Insert the body poles into the pole sleeves.

t Read all instructions before set up.
t Select a level site clear of rocks, branches, and other hard or 

sharp objects, to install your tent.

t Do not set up your tent under trees because of potential 

lightning strikes or falling tree limbs in inclement weather.

t Secure with all stakes and guylines provided to prevent 

property damage or personal injury.

t For best results in windy conditions, position narrow end of 

tent into the wind.

t Enlist the help of at least one other person to assist you 

when it is time to assemble the tent.