Avaya 9500 Series User Manual

An auto dialing button is used to store a frequently used or important number. Whenever the number needs to be dialed,
pressing the button will dial the stored number. 

1. At dial tone or whenever you want to dial a number, press the programmed auto dial button. 

2. The stored number is dialed.

1. Press the Admin soft key on the display.

· During a call, press the 

 PHONE button to display the Admin soft key option. If you access phone

administration during a call, only the   SPEAKER,   MUTE and 

 HEADSET buttons still affect the

connected call. 

2. Use the 

 up or down 

 arrow buttons to scroll to Telephone Programming. Press Select.

3. Press the programmable button you want to change. Alternatively:

· Use the 

 up or down 

 arrows to scroll to Button Programming. Press Select.

· At the Button: prompt press the button to edit or enter from the button number.

4. The current setting of that button is displayed. 

5. Press Program and either press Intercom 2 or use the 

 up or down 

 arrow buttons to scroll the display to

Auto Dial - Other and press Select. 

6. At the AD-O: prompt enter the number for calls made using the button. The number can include * and # and the

following special characters: 

· These options are accessed by pressing More and then selecting Pause, Stop or Recall as required. 

Inserts a 1.5 second pause.

Send a hook-switch flash signal. 

Stop dialing. 

7. The current setting of the button will now be AD-O followed by the stored number. 

8. To remove the current setting press Clear. 

· Exit phone administration by pressing the 

 PHONE button. Alternatively use the Back button to move to

another menu.