AT&T WF721 User Manual

6

Getting Started

Getting Started

7

Turn on Your Device

 Plug the power cord into an electrical wall outlet that is 

not controlled by a wall switch.
 Insert the small end of the power cord into the round 

Power Input port on the back of your Wireless Home 

Phone device.

Slide the On/Off switch to the On position. 

Check the Wireless Signal

Raise the antenna to an upright position and check the 

signal strength.
 More green bars indicate a stronger signal. Your device 

can be relocated in your home for best performance.

On/Off

Signal 

Strength

2

4

3

Connect the Device to a Phone

1)   Unplug your phone  

from your home  

phone wall jack.

2)   Plug your phone into the 

“Phone 1” port on the 

Wireless Home Phone  

device, using your existing 

phone cable or included 

phone cable.

IMPORTANT: DO NOT plug the Wireless Home

Phone device or your phones into your wall jacks.