Black Box AC216A-R2 User Manual
Chapter 4 : FRONT PANEL DISPLAY MENU DESCRIPTION (continued)
AC211A-R2 & AC216A-R2
PAGE 18
4-5. FUNCTIONS DESCRIPTION (continued)
3
[IMAGE] + ENTER.
3-1
[Pos./size adj.] + ENTER.
Select one of the following function with + ENTER.
3-1-1
Select one of the following function with + ENTER.
3-1-1
[H position] + ENTER.
Adjust the Horizontal position with + ENTER.
Adjust the Horizontal position with + ENTER.
3-1-2
[V position] + ENTER.
Adjust the Vertical position with + ENTER.
Adjust the Vertical position with + ENTER.
3-1-3
[H size] + ENTER.
Adjust the Horizontal size with + ENTER.
Adjust the Horizontal size with + ENTER.
3-1-4
[V size] + ENTER.
Adjust the Vertical size with + ENTER.
Adjust the Vertical size with + ENTER.
3-2
[Aspect in] + ENTER.
Select the Aspect Ratio of your input source with + ENTER.
Select the Aspect Ratio of your input source with + ENTER.
• [4/3 standard]: 4/3
input
format.
• [16/9 letterbox]:
Letterbox input format.
• [WS anamorphic]: Widescreen Anamorphic input format.
• [Return]:
Allows to return to the previous menu without safeguarding.
3-3
[Aspect out] + ENTER.
Select one of the following output aspect ratio with + ENTER.
Select one of the following output aspect ratio with + ENTER.
• [Standard]: The entire image and the aspect ratio are preserved.
• [Crop]:
The image is zoomed without deformation to fill the screen, but some borders of the image will
be cropped. The aspect ratio is preserved.
be cropped. The aspect ratio is preserved.
• [Full screen]: The image is stretched to fill the screen. The aspect ratio is not preserved.
• [Return]:
Allows to return to the previous menu without safeguarding.
3-4
[Under/over] + ENTER.
Select Underscan or Overscan with + ENTER.
Select Underscan or Overscan with + ENTER.
• [underscan]: Underscan mode. The entire image is visible on the screen. Computer mode is underscan.
• [overscan]:
Overscan mode. The image is displayed about 8 % bigger than in underscan mode, to avoid
seeing the corners and the borders. Standard TV display mode is overscan.
seeing the corners and the borders. Standard TV display mode is overscan.
3-5
[Brightness] + ENTER.
Adjust the brightness with + ENTER.
Adjust the brightness with + ENTER.
3-6
[Contrast] + ENTER.
Adjust the contrast with + ENTER.
Adjust the contrast with + ENTER.
3-7
[Color] + ENTER.
Adjust the color with + ENTER.
Adjust the color with + ENTER.
3-8
[Hue] + ENTER.
Adjust the tint of the picture (NTSC only) with + ENTER.
Adjust the tint of the picture (NTSC only) with + ENTER.
3-9
[Sharpness] + ENTER.
Adjust the sharpness with + ENTER.
Adjust the sharpness with + ENTER.
3-10
[Preset] + ENTER.
This function allows setting all the image parameters to the factory settings. Select [YES] and validate with
ENTER.
This function allows setting all the image parameters to the factory settings. Select [YES] and validate with
ENTER.