Black Box AC216A-R2 User Manual
AC211A-R2 & AC216A-R2
Chapter 1 : INTRODUCTION (continued)
PAGE 7
1-5. INSTALLATION
IMPORTANT:
Please read all the safety instructions (pages 2 to 4) before starting.
• Table Top Mounting: The devices can be used directly on a table: they are equipped with 4 plastic feet.
• Rack Mounting:
• Rack Mounting:
The AC216A-R2 is compatible with a 19" enclosure. To install the device into a 19” rack:
Attach the device to the rack by using 4 screws in the front panel holes (screws are not
included). Connect all of the cables to the devices and attach them to the rack with some tie
wraps.
Attach the device to the rack by using 4 screws in the front panel holes (screws are not
included). Connect all of the cables to the devices and attach them to the rack with some tie
wraps.
IMPORTANT:
• The openings in the rear and side panels are for cooling. Do not cover these openings.
• Be sure that no weight is added onto the device in excess of 2 kg (4.4 lbs.).
• The maximum ambient operating temperature must not exceed 40°C (104°F).
• The rack and all mounted equipment in it must be reliably grounded to national and
• Be sure that no weight is added onto the device in excess of 2 kg (4.4 lbs.).
• The maximum ambient operating temperature must not exceed 40°C (104°F).
• The rack and all mounted equipment in it must be reliably grounded to national and
local electrical codes.