Samsung SDR5100 User Manual

English

 

 main menu

HDD alarm

You can set alarm settings for HDD defects such as Check Alarm Output Port, Replace Alarm Output Port, 

and its duration.

          Using the mouse may help make setup easier.

1.  Use the up/down buttons ($%) in <Device> window to 

move to <Storage Device>, and press [enTeR] button.

2.  Select <HDD alarm>.

A window for setting HDD check and replace output ports 

and their durations appears.

3.  Use direction buttons ($%_ +) to move to the desired 

item.

Alarm

 - If <BeeP> was selected, a beep will sound.

Check Alarm Output Port : If HDD generates check alarm, the alarm signal will output to the specified alarm 

output port.

Replace Alarm Output Port : If HDD generates replace alarm, the alarm signal will output to the specified 

alarm output port.

Duration : Sets the alarm duration for the alarm signal and beep sound.

 `

<Check> status means that the HDD is operating but it has problems that require technical examination.

(

) appears on the Live screen.

 `

<Replace> status means that the HDD has defect and requires immediate replacement.

(

) appears on the Live screen.

4.  When the HDD Alarm setup is done, press <OK>.

Remote Devices

You can set the RS-485 communication for use of PTZ Camera and system keyboard with the DVR.

          Using the mouse may help make setup easier.

1.  Use the up/down buttons ($%) in <Device> window to 

move to <Remote Device>, and press [enTeR] button.

2.  Use direction buttons ($%_ +) to move to the desired 

item, and press [enTeR] button.

3.  Set the values of each communication setup of the remote 

device.

Baudrate : Baud rate settings of the DVR, PTZ camera and 

system keyboard should be matched for proper operations.

4.  Specify the system keyboard and remote control ID, and 

click <OK>.

 `

For changing the remote control’s ID, refer to “Changing the Remote Control ID”. (Page 14) 

 

OK

 Cancel



 Check Alarm Output Port



 Duration 

OFF

BEEP



 Replace Alarm Output Port



 Duration 

OFF

BEEP

System Keyboard 

OFF 

ID 

1

Remote Control 

ON 

ID 

0

 

Baudrate 

Parity 

Data 

Stop Bit 

Transfer type

 

9600 

 

None   

8 

 

1 

 

Half Duplex

 

OK 

Cancel