Samsung SDR5100 User Manual

 

main menu

main menu

Preset Setting

A preset is a set of specific target points of a PTZ camera, and up to 127 presets per a camera can be stored.
1.  In PTZ Control mode, use the direction buttons to adjust the camera in a desired direction.
2.  Select the <Save> key.

The virtual keyboard for inputting the preset will appear.

 `

Refer to “Using Virtual Keyboard”. (Page 36)

Save : You can save the preset settings.

Rename : You can change the settings of the existing presets.

Delete : Deletes the selected preset.

Delete All : Deletes all existing presets.

 `

If you replace the camera of the channel that stores the preset list with a new one, you should reset the preset 

accordingly.

3.  Press <OK>.

The preset will be saved as a name that you entered. 

 

 

 

 

 

 

           

 

           

Camera Setting

A PTZ camera has its own menu system. Optimize the PTZ camera according to the DVR.
1.  Connect the PTZ camera to the DVR and run the PTZ 

camera again to display the camera’s protocol setting 

window.

2.  Check the protocol ID of the camera.

 `

In “Device > Setting the PTZ”, enter the PTZ camera ID in the 

ID input box of the channel that is connected to the PTZ camera. 

(Page 47)

3.  Select <Camera Setup> in the PTZ Control menu.

The camera-specific menu appears.

 `

You can configure the settings of only those cameras that support 

the protocols of Samsung, Pelco D/P, AD and Panasonic.

 `

If you are setting Auto Pan or Pattern in the camera menu, press 

and hold the appropriate button for a certain time so that the button 

operation can be different from that in normal PTZ setting.

2012-01-01 01:10:25

2012-01-01 01:10:25

Camera Setup



Exit

2012-01-01 01:10:25

2012-01-01 01:10:25