Samsung SDR5100 User Manual

 

Web Viewer

Web Viewer

If Microsoft Silverlight plug-in is already installed

1.  Use a web browser to connect to the DVR.
2.  If Silverlight plug-in is already installed, you will see the 

screen as shown.

3.  If this is the case, perform Step 3 [tcP port & Web 

Viewer port settings] below.

4.   If the screen above does not appear, check if the DVR set is connected properly with a valid IP address.

uSIng lIVe VIeWer (MAc)

The Live Viewer screen consists of following :

a

  This displays the IP address and the model name of the connected DVR.

b

  These menus consist of <lIVe>, <About>.

c

  These buttons are used for the screen split and full screen mode. (Max. : 9CH)

d

  Shows the IP address and model name of the connected DVR.

e

  Select to turn the sound on/off.

f

  Select <dVr time> or <Pc time> for the OSD time information display setting of the Live Viewer.

g

  These buttons are used for sequence and changing the screen channel.

h

  These buttons are used for capture, print, and save the image.

When you can’t play the file recorded in web, install the H.264 CODEC

ex) MAC: perian_1.2.3.dmg (http://perian.org)

i

  Shows the channel of the connected DVR.

j

  These buttons are used for PTZ related functions.

k

  This displays the screen for connected camera with DVR.

a

c
d
e

g
h

f

k

b

i

j