Pioneer AVH-271BT User Manual

Selecting the theme color

A theme color can be selected from 3 different colors.

1 Display the “Theme” screen.

2 Touch [Theme].
3 Touch the color you want.

Adjusting the subwoofer
settings

This function is available only when “Subwoofer” is “On”.

 Using the subwoofer output on page 25

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 25

2 Touch [Subwoofer Settings].
3 Touch or

to turn the subwoofer phase

to normal or reverse.

4 Touch or

to adjust the subwoofer level

between -24 and 6.

5 Touch or

to adjust the subwoofer

frequency.

The following items are available:

80Hz(default), 50Hz, 63Hz, 80Hz, 100Hz, 125Hz.

Switching the rear speaker
output

1 Turn the source off.
2 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 25

3 Touch [Rear Speaker].
4 Touch to switch “Full” (default) or “Subwoofer

Settings”.

 When this function is set to “Subwoofer

Settings”, “Preout” is fixed to “Subwoofer

Settings”.

Switching the RCA rear output

When “Rear Speaker” is set to “Subwoofer Settings”, this set-

ting is fixed to “Subwoofer Settings”.

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 25

2 Touch [Preout] to switch “Subwoofer

Settings”(default) or “Rear”.

Boosting the bass

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 25

2 Touch [Bass Booster].
3 Touch to select the bass boost level from 0 to

+6.

Setting the high pass filter

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 25

2 Touch [High Pass Filter].
3 Touch the item.

The following items are available:

Off(default), 50Hz, 63Hz, 80Hz, 100Hz, 125Hz.

Using the equalizer

Recalling equalizer curves

There are seven stored equalizer curves that you can easily recall

at any time. Here is a list of the equalizer curves:

●

S.Bass is a curve in which only low-pitched sound is boosted.

●

Powerful is a curve in which low- and high-pitched sounds

are boosted.

●

Natural is a curve in which low- and high-pitched sounds

are slightly boosted.

●

Vocal is a curve in which the midrange, which is the human

vocal range, is boosted.

●

Flat is a flat curve in which nothing is boosted.

●

Custom1 is an adjusted equalizer curve that you create. If

you select this curve, the effect is applied to all AV sources.

●

Custom2 is an adjusted equalizer curve that you create. If

you select this curve, the effect is applied to all AV sources.

The default setting is “Powerful”.

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 25

2 Touch [Graphic EQ].
3 Touch the equalizer you want.

Customizing the equalizer curves

You can adjust the currently selected equalizer curve setting

as desired. Adjustments can be made with a 5-band graphic

equalizer.
p

If you make adjustments when a curve “S.Bass”, “Powerful”,

“Natural”, “Vocal”, or “Flat” is selected, the equalizer curve

settings will be changed to “Custom1” mandatorily.

If you make adjustments when the “Custom2” curve is

selected for example, the “Custom2” curve will be updated.

“Custom1” and “Custom2” curves can be created common

to all sources.

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 25

2 Touch [Graphic EQ].
3 Select a curve that you want to use as the basis

of customizing.

4 Touch the frequency for which you want to

adjust the level.

If you trail a finger across the bars of multiple equalizer

bands, the equalizer curve settings will be set to the value of

the touched point on each bar.

< CRD4837-B >

Audio adjustments

< CRD4837-B > 26