Pioneer AVH-271BT User Manual

6

  Checking part names and functions on page 8

Settings and recorded contents are reset to the factory settings.

This manual uses diagrams of actual screens to describe opera-

tions. However, the screens on some units may not match those 

shown in this manual depending on the model used.

270BT

This indicates model name that are supported 

the described operations.
This indicates to touch an appropriate soft key 

on the touch screen.

This indicates to touch and hold an appropriate 

soft key on the touch screen.

This indicates that there is a reference or 

supplementary for the key or screen.

●

  In some countries the viewing of video image on a display 

inside a vehicle even by persons other than the driver may 
be illegal. Where such regulations apply, they must be 
obeyed.

If you attempt to watch video image while driving, the warning 

“Viewing of front seat video source while driving is strictly 

prohibited.” will appear on the screen. To watch video image 

on this display, stop the vehicle in a safe place and apply the 

parking brake. Please keep the brake pedal pushed down before 

releasing the parking brake.

The video output terminal (V OUT) is for connection of a display 

to enable passengers in the rear seats to watch video images.

NEVER install the rear display in a location that enables the 
driver to watch video images while driving.

Be sure to run the vehicle engine while using this product. Using 

this product without running the engine can drain the battery.

Do not install this product in a vehicle that does not have an 
ACC wire or circuitry available.

With an optional rear view camera, you are able to use this 

product as an aid to keep an eye on trailers, or backing into a 

tight parking spot.

●

  SCREEN IMAGE MAY APPEAR REVERSED.

●

  USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE 

REAR VIEW CAMERA. OTHER USE MAY RESULT IN 
INJURY OR DAMAGE.

The rear view mode is to use this product as an aid to keep 
an eye on the trailers, or while backing up. Do not use this 
function for entertainment purposes.

●

  To prevent data loss and damage to the storage device, 

never remove it from this product while data is being 
transferred.

●

  Pioneer cannot guarantee compatibility with all USB mass 

storage devices and assumes no responsibility for any loss 
of data on media players, iPhone, smartphone, or other 
devices while using this product.

Please contact the dealer or distributor from which you 
purchased the product for after-sales service (including 
warranty conditions) or any other information. In case the 
necessary information is not available, please contact the 
companies listed below.
Please do not ship your product to the companies at the 
addresses listed below for repair without making advance 
contact.

●

 U.S.A

Pioneer Electronics (USA) Inc.
CUSTOMER SUPPORT DIVISION
P.O. Box 1760 Long Beach, CA 90801-1760
800-421-1404

●

 CANADA

Pioneer Electronics of Canada, Inc.
CUSTOMER SATISFACTION DEPARTMENT
340 Ferrier Street, Unit 2, Markham, Ontario L3R 2Z5, 
Canada
1-877-283-5901
905-479-4411

For warranty information, please see the Limited Warranty 
sheet included with your product.

Visit us at the following site:

1  Register your product.

2  Receive updates on the latest products and technologies.

3  Download owner’s manuals, order product catalogs, 

research new products, and much more.

4  Receive notices of software upgrades and software updates.

●

  Do not expose the LCD screen to direct sunlight when this 

product is not used. This may result in LCD screen malfunc-

tion due to the resulting high temperatures.

●

  When using a cellular phone, keep the antenna of the cel-

lular phone away from the LCD screen to prevent disruption 

of the video in the form of spots, colored stripes, etc.

●

  To protect the LCD screen from damage, be sure to touch the 

touch panel keys only with your finger and do so gently.

●

  Some of the settings and recorded contents will not be reset.

The information is erased by disconnecting the yellow lead from 

the battery (or removing the battery itself).

●

  Some of the settings and recorded contents will not be reset.

Pressing the RESET button resets settings and recorded 
contents to the factory settings.

●

  Do not perform this operation when a device is connected 

to this product.

●

  Some of the settings and recorded contents will not be 

reset.

The microprocessor must be reset under the following 

conditions:

●

  Prior to using this product for the first time after installation.

●

  If this product fails to operate properly.

●

  If there appears to be problems with the operation of the 

system.

●

  If your vehicle position is shown on the map with a signifi-

cant positioning error.

< CRD4837-B >

< CRD4837-B >

< CRD4837-B > 6