Black Box AC1120A User Manual

 

 

 

Press and release any output button, the backlit LED of that button will light, and 
if that output’s video and audio are tied to one particular input, that input LED 
will also light.  

 
You can now use the ▲ and ▼ buttons to quickly go through all outputs. 
You can also make new ties by hitting another input button. New ties will not take 
effect unless ENTER is hit (see next section). 
 
When you are done viewing ties, to exit you can hit ENTER. If you don’t hit any 
buttons, then after 8 sec the view function times out and all the input and output 
LEDs will go out.  
 
3.1.1.2 Viewing ties by Video only 
Press and release the AUD and/or VID buttons so that the backlit LED of the VID 
button is lit and the AUD button is off 
At this point you have to decide if you want to view from the point of view of the 
input side or the output side. 

Press and release any Input button, the backlit LED of that button will light, and 
all the backlit LEDs for the outputs whose video is currently tied to this input will 
also light up solid. 
You can now use the ▲ and ▼ buttons to quickly go through all inputs. 
You can also make new ties by hitting output buttons. New ties will not take 
effect unless ENTER is hit (see next section). 
When you are done viewing ties, to exit you can hit ENTER. If you don’t hit any 
buttons, then after 8 sec the view function times out and all the input and output 
LEDs will go out.  

Press and release any output button, the backlit LED of that button will light, and 
if that output’s video is tied to any input, that input LED will also light.  
You can now use the ▲ and ▼ buttons to quickly go through all outputs. 
You can also make new ties by hitting another input button. New ties will not take 
effect unless ENTER is hit (see next section).