Sharp AL-1035-WH User Manual

Page of 50
                                                 46
REPLACING DRUM CARTRIDGES
Please replace the drum cartridge according to the following steps.
1
Open the cover of the machine and 
remove the toner cartridge.
2
Hold the green-marked position with 
your both hands and rotate in the 
direction of the arrow, and take out 
the old drum cartridge.
3
Aim the new drum cartridge to the 
bayonet of the machine, insert it into 
the bayonet, rotate in the direction of 
the arrow and insert the drum 
cartridge until a "click" is heard.
4
Insert the toner cartridge into the 
bayonet of the machine, press it down 
in the direction of the arrow until a 
"click" is heard. Gently lift support bar 
at the green-marked and pull to a 
half-closed postion, and then gently 
lift the bar again until the cover is 
completely closed.
5
Turn on the power, press the 
[DENSITY] key and [PHOTO MODE] 
key at the same time until all 
indicators except for [PHOTO MODE] 
indicator light on.
6
Press the [DENSITY] key again until 
the indicatiors return to normal status. 
Confirm whether the indicator of the 
drum cartridge is light off.
Do not touch the surface of the drum (green 
portion) of the drum cartridge when replacing 
the drum cartridge. Doing so may damage the 
drum and cause smudges on copies.
Caution
Before closing the cover, make sure that the 
new drum cartridge is correctly installed.
Note