Panasonic AJ-HPM110P User Manual

Page of 168
Setup: Changing Settings
117
 Se
tup
Assign a setting item to the PF button and perform the 
following operation to change setting values. 
➝For details on how to assign items to the PF button, refer to 
1
Press the PF (EXIT) button. 
Registered items appear on the LCD monitor. 
2
Press the PF button (1 to 3) required to bring up the 
item to change.
Each press of the button updates the setting value. 
3
Press the PF (EXIT) button to end changing settings.
◆ NOTE: 
• The change process is automatically disengaged if left idle for 
5 seconds. 
• The PF button is not available in the thumbnail and play list 
modes. 
You can lock the system files and user setting files (USER2 to 
USER5) to prevent inadvertent changes. 
➝For details on releasing the system file lock setting, refer to 
“Setup menu No. 30 (MENU LOCK)” (page 119).
➝For details on releasing the user file lock setting, refer to 
“Setup menu No. A03 (MENU LOCK)” (page 139).
◆ NOTE:
• Files can be loaded from the SD memory card even if they are 
locked. The status after load operation depends on the setting 
defined by the loaded data.
When the menu is open, you can return the content of the user 
setting file that appear on the screen to its factory defaults. 
◆ NOTE: 
• This operation returns the content of the user setting file displayed 
on the screen to its factory defaults. The setting files of other users 
are not affected. 
• System settings cannot be returned to their factory defaults when a 
system file is open. Other settings are returned to their factory 
defaults. 
• Settings cannot be returned to their factory defaults when MENU 
LOCK is engaged. Set MENU LOCK to OFF. 
1
Press the RESET button when the menu is open. 
2
Press the SET button. 
Using a Lock to Protect the User Setting File
Returning to Factory Defaults (Initial Settings)
PC
CONTROL
REMOTE
LOCAL
UNITY
4
2
2 4
UNITY
3
1
1 3
PB
CH
30
10
0
10
20
2/4
CH
1/3
1
2