Panasonic AJ-HPM110P User Manual

Page of 168
40
Introduction: Recording From a Variable Frame-Rate Camera
To record active frames from the output of a variable frame-
rate camera, set setup menu No. 040 VFR REC to ON. This 
enables instant viewing of slow-motion and fast-motion speed 
effects during shooting.
◆ NOTE: 
• Audio and external time codes cannot be recorded in this mode.
• In this mode, the remaining P2 card capacity at 60p (50p), the 
slowest slow-speed effect, is indicated.
• When 59-23 or 60-24 is set in setup menu No. 25 SYSTEM FREQ, 
movement in HD SDI video output may look unnatural when the 
input frame rate is something other than 24p.
The unit is capable of AVC-Intra 1080/23.98p native recording 
of HD SDI (1080/23.98p over 59.94i) output from an HD camera. 
1
Connect the HD SDI (1080/23.98p over 59.94i) 
output from an HD camera recorder to the SDI IN 
connector and press the INPUT SELECT button to 
select SDI. 
2
Make the following setup menu settings. 
3
Hold down the REC button and the STILL/PAUSE 
button simultaneously to set the unit to REC PAUSE 
mode.
4
To start recording, press the STILL/PAUSE button 
while viewing the video output from the camera HD 
SDI output.
◆ NOTE: 
• Setup menu No. 155 AUTO REC to TYPE2 and set the CONTROL 
switch to REMOTE. The unit will then automatically start and stop 
recording as the REC and STOP buttons are pressed on the 
camera.
• SDI is output in the 1080/23.98 PsF video format. Analog video and 
IEEE1394 are not output.
• The TIME CODE OUT connector does not output a time code and 
no time code can be input to the TIME CODE IN connector.
• The SDI output is delayed relative to LCD monitor and monitor video 
output. Analog audio, speaker and headphone output is 
synchronized to the LCD monitor and monitor video output. To 
synchronize these outputs to SDI output, set setup menu No. 778 
AUD OUT DLY to ON.
• Set camera TCG to FREE RUN. A TC/UB of an SDI input that cannot 
be properly read cannot be normally recorded.
Variable Frame Rate-Recording
Recording HD SDI signals output by an HD camera as 1080/23.98p (requires 
optional accessories)
Recording HD SDI signals from camera 
output
HD SDI (1080/23.98p over 59.94i) output
SDI IN connector
3
4
1
Item
Setting
No.25
SYSTEM FREQ
59-23
No.020
SYS FORMAT
1080p