Panasonic AJ-HPM110E User Manual

Using Play List: Creating Play Lists

ing P

Li
st

Follow the steps below to replace audio channels after event

registration.

Select one or multiple events whose channels you

want to replace in the play list screen.

Press the MENU button, use the cursor buttons to

choose [SETTING] – [AUDIO CH] and press the SET

button.

Select the channels that will be replaced.

Example: Make the following registration to switch CH1

and CH2 locations.

[AUDIO CH]- [CH1]=CH2

[CH2]=CH1

[CH3]=CH3

[CH4]=CH4

◆ NOTE:

• Select [SETTING] – [AUDIO CH] – [RESET] to return channel

settings to their factory defaults.

Press the MENU button, use the cursor buttons to

choose [OPERATION] – [EDIT AUDIO CH] and

press the SET button.

Then select [YES] to switch channel locations.

◆ NOTE:

• A channel switch is indicated by “EDITED” in the A CH field. The

status after the switch also shows up in the event property.

Use the following procedure to add selected clips to the play

list. This operation registers the start of a clip as the IN point

and its end as the OUT point.

Select the clip you want to register in the play list from

the thumbnail screen.

Open the play list screen.

Use the cursor buttons to select the location where

you want to add the clip.

Press the MENU button.

Use the cursor buttons to choose [OPERATION] –

[APPEND SELECTED CLIP].

Audio Channel Replacement During
Editing

Registering Events for Selected
Clips