Sharp AL-1035-WH A User Manual

Ensure that the machine is not printing or copying, and carry out paper feeding according to the following steps.

Open the paper package, 
flip the paper fully, and 
then load into the tray.

• The loaded paper cannot exceed the limit of 

the paper guide (max. 40 pieces).

• Do not add paper onto the loaded paper. 

Otherwise, several pieces of paper will be 
fed into the machine at one time.

• To add paper, remove the paper remaining 

on the feed tray and combine them into one 
stack before loading. The size and type of 
the added paper shall be consistent with 
the previous one.

• Do not use paper smaller than the size of 

the original. Otherwise folding or an 
incomplete image may be resulted in.

• Do not use paper that has been printed by 

another printer or multifunction device. 
Otherwise, a folded or corrupted image 
may be resulted in.

• When printing on the reverse side of 

previously printed paper, the paper must be 
loaded one sheet at a time. Loading more 
than one sheet at a time may cause 
misfeeds or dirty.

• In the case of a misfeed, tidy the paper and 

reload it.

• Flatten curled paper before using it.
• When loading the paper, align with the 

proper position on the paper guide.

• When misfeed occurs, rotate the paper 180 

degrees and reload.