Sharp AL-1035-WH A User Manual

Add paper to the feed tray, and then press the [COPY START] key (

) to resume printing.

To cancel a printing task, press the [CLEAR] key (

).

You can access the printer driver or change the driver settings through the "start" button of Windows. Settings 
adjusted in this way will be the initial settings when you print from an application. (If you change the settings from the 
printer driver setup screen at the time of printing, the settings will revert to the initial settings when you quit the 
application.)

• In Windows 2000, click the "Start" button and 

point to "Settings", and then select "Printers".

•  In Windows Vista, click the "Start" button and 

select "Control Panel" and then select 
"Printers".

• In Windows 7, click the "Start" button, and then 

select "Equipment and Printers".

 

• In Windows Vista, select "Properties" from the 

"Organize" menu.

• In Windows 7, right click the printer driver icon 

and select "printer properties".

The printer driver setup screen will appear.

• For the restrictions on the COPY/SCAN mode in the PRINT mode and the restrictions on the PRINT mode in the 

SCAN/COPY mode, please refer to

• In Windows XP, if "Printers and Faxes" 

does not appear in the "start" menu, select 
"Control Panel", select "Printers and Other 
Hardware", and then select "Printers and 
Faxes".

• In Windows 7, if "Equipment and Printers" 

does not appear in the "start" menu, select 
"Control Panel", select "Hardware and 
Sound", and then select "View Equipment 
and Printers".