Insignia NS-WG1542 User Manual

CORNER TV STAND

www.insigniaproducts.com

ASSEMBLY INSTRUCTIONS

Step 1: Preparing the legs and frame.

Caution: Do not fully tighten allen bolts (L) until Step 2.

1 Screw four floor levelers (J) into the holes in the legs (A).

2 Connect the slots on the legs (A) to the slots on the frame (B), and attach using four allen screws (K) with the

allen wrench (P).
Tips:
The back side of frame (

B) is labeled "Back."

The top of the legs (

A) and the top of the frame (B) should be flush when the parts are connected.

3 Attach the support bar (C) to the legs using two allen bolts (L) with the allen wrench (P).

Tip: The hole in the support bar (C) should face up (see the arrow).

FRO

You’ll need:

4 - Allen screws (K)

2 - Allen bolts (L)

4 - Floor levelers (J)

1 - Allen wrench (P)

NS-WG1542_14-0295_MAN_V2_ENG.fm Page 5 Monday, April 28, 2014 7:32 AM