Audiovox D2016 User Manual

19

N. Setup
1. General Setup Page
1)With no disc inside the player, press ‘SETUP’ to display the Main screen
of the Setup Menu  on the screen and “General Setup Page” appears. At
the same time,  “

” is highlighted. Press ‘SETUP’ again to exit the

Setup Menu.
2)Press the ENTER button, “TV Display” is highlighted.
3) Press the 

  

 or 

  

buttons to select the other menus in general setup

page.
4) Press 

 to enter the sub menu.

5) Press the 

  

 or 

  

button to select the desired option in the sub

menu and press the ENTER to confirm your selection.
6) Repeat steps 3-5 for other menus.
Note: Press

 to return the previous menu.

* Normal/PS: When the player outputs signal to a normal TV, a nor-

mal picture is shown on the full screen.

* Normal/LB: When the player outputs signal to a normal TV, a normal

picture is shown on the screen with a black strip at both  the top and
bottom of the screen.

* Wide: When the player outputs signal to a wide screen TV, a

wide picture is shown on the full screen.

*On: Enables screen saver
*NOTE: The DVD player will enter the Screen Saver mode after ap-
proximately three minutes if the same image remains on  the
screen.*Off: Disables screen saver (off)

*On:   The unit will return to the last position on the disc.
*Off:   The unit will not return to the last position on the disc.
Note: The Last position memory function will only work  when the

disc tray is OPEN or the AV In/Out is switched.