Sony DVP-FX1 User Manual

Introduction

2

CAUTION
The use of optical instruments with this
product will increase eye hazard. As the laser
beam used in this CD/DVD player is harmful
to eyes, do not attempt to disassemble the
cabinet.
Refer servicing to qualified personnel only.

Safety
• This unit operates on 100 - 240 V AC, 50/60

Hz.  Check that the unit's operating voltage
is identical with your local power supply.

• If anything falls into the cabinet, unplug the

unit and have it checked by qualified
personnel before operating it any further.

• The unit is not disconnected from the mains

as long as it is connected to the mains outlet,
even if the unit itself has been turned off.

• Unplug the unit from the wall outlet if you

do not intend to use it for an extended
period of time.  To disconnect the cord, pull
it out by the plug, never by the cord.

Installing
• Allow adequate air circulation to prevent

internal heat buildup.

• Do not place the unit on surfaces (rugs,

blankets, etc.) or near materials (curtains,
draperies) that may block the ventilation
slots.

• Do not install the unit near heat sources

such as radiators or air dusts, or in a place
subject to direct sunlight, excessive dust,
mechanical vibration or shock.

• Do not install the unit in an inclined

position.  It is designed to be operated in a
horizontal position only.

• Keep the unit and discs away from

equipment with strong magnets, such as
microwave ovens or large loudspeakers.

• Do not place heavy objects on the unit.
• If the unit is brought directly from a cold to

a warm location, moisture may condense
inside the CD/DVD player and cause
damage to the lenses.  When you first install
the unit, or when you move it from a cold to
a warm location, wait for about 30 minutes
before operating the unit.

Thank you for purchasing the Sony CD/DVD
Player. Before operating the unit, please read
this manual thoroughly and retain it for future
reference.