Sony DVP-FX811 User Manual

D:\2008_A\FFeiyu_2008_0218_Foxconn\3294108111\3294108111DVPFX811K
FX811\US\01US02WAR-CEK.fm

master page=left

DVP-FX811K/FX811

3-294-108-31(1)

The use of optical instruments with 
this product will increase eye 
hazard. As the laser beam used in 
this CD/DVD player is harmful to 
eyes, do not attempt to disassemble 
the cabinet.
Refer servicing to qualified 
personnel only.

This label is located on the bottom 
of the unit.

This symbol is 
intended to alert the 
user to the presence 
of uninsulated 
“dangerous voltage” 

within the product’s enclosure that 
may be of sufficient magnitude to 
constitute a risk of electric shock to 
persons.

This symbol is 
intended to alert the 
user to the presence 
of important 
operating and 

maintenance (servicing) 
instructions in the literature 
accompanying the appliance.

Precautions
• Install this system so that the AC 

power cord can be unplugged 
from the wall socket 
immediately in the event of 
trouble.

• The player is not disconnected 

from the AC power source as 
long as it is connected to the wall 
outlet, even if the player itself 
has been turned off.

• To prevent fire or shock hazard, 

do not place objects filled with 
liquids, such as vases, on the 
apparatus.

The model and serial numbers are 
located at the bottom of the unit.
Record the serial number in the space 
provided below. Refer to them
whenever you call upon your Sony 
dealer regarding this product.
Model No. DVP-FX811K/FX811

Serial No._____________

_

You are cautioned that any change 
or modifications not expressly 
approved in this manual could void 
your authority to operate this 
equipment.

This equipment has been tested 
and found to comply with the 
limits for a Class B digital device, 
pursuant to Part 15 of the FCC 
Rules. These limits are designed to 
provide reasonable protection 
against harmful interference in a 
residential installation. This 
equipment generates, uses, and can 
radiate radio frequency energy 
and, if not installed and used in 
accordance with the instructions, 
may cause harmful interference to 
radio communications. However, 
there is no guarantee that 
interference will not occur in a 
particular installation. If this 
equipment does cause harmful 
interference to radio or television 
reception, which can be 
determined by turning the 
equipment off and on, the user is 
encouraged to try to correct the 
interference by one or more of the 
following measures:
– Reorient or relocate the 

receiving antenna.

– Increase the separation between 

the equipment and receiver.

– Connect the equipment into an 

outlet on a circuit different from 
that to which the receiver is 
connected.

– Consult the dealer or an 

experienced radio/TV technician 
for help.

1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus 

near water.

6) Clean only with dry cloth.
7) Do not block any ventilation 

openings. Install in 
accordance with the 
manufacturer’s instructions.

8) Do not install near any heat 

sources such as radiators, 
heat registers, stoves, or 
other apparatus (including 
amplifiers) that produce 
heat.

9) Do not defeat the safety 

purpose of the polarized or 
grounding-type plug. A 
polarized plug has two 
blades with one wider than 
the other. A grounding type 
plug has two blades and a 
third grounding prong. The 
wide blade or the third prong 
are provided for your safety. 
If the provided plug does not 
fit into your outlet, consult 
an electrician for 
replacement of the obsolete 
outlet.

10) Protect the power cord from 

being walked on or pinched 
particularly at plugs, 
convenience receptacles, 
and the point where they exit 
from the apparatus.

11) Only use attachments/

accessories specified by the 
manufacturer.

01US01COV.book  Page 2  Wednesday, February 20, 2008  11:34 AM