RCA DRC99310KR User Manual

WARNING: Should any trouble occur, disconnect the AC power adapter and refer servicing to a qualified 

technician.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT REMOVE COVER (OR BACK). NO USER-

SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR 

MOISTURE. DO NOT PLACE OBJECTS FILLED WITH LIQUIDS ON OR NEAR THIS UNIT.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN 

THOSE SPECIFIED MAy RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION: DANGER OF EXPLOSION IF BATTERy IS INCORRECTLy REPLACED. REPLACE ONLy WITH THE 

SAME OR EQUIVALENT TyPE.

On Placement

•  Do not use the unit in places that are extremely hot, cold, dusty or humid.

•  Place the unit on a flat and even surface.

•  Do not restrict the air flow of the unit by placing it in a place with poor air flow, by covering it with a

cloth, or by placing it on carpeting.

•  To avoid magnetizing, do not place the unit near speakers or magnets.

•  Do  not  use  this  unit  in  direct  sunlight  or  leave  the  unit  in  a  closed  automobile  (or  similar

environments) where it would be exposed to high temperatures above 104°F (40°C).

•  No naked flame sources such as lighted candles should be placed on the AC power adapter or the main

unit.

•  The AC/DC adaptor and apparatus should not be exposed to splashing or dripping liquids, and no

objects filled with liquids, such as vases, should be placed on the AC/DC adaptor and apparatus.

•  The apparatus should not be exposed to dripping or splashing and that no objects filled with liquids,

such as vases, should be placed on apparatus. 

On Safety

•  When connecting or disconnecting the AC power adapter, grip the plug and not the cord itself.

Pulling the cord may damage it and create a hazard.

•  When you are not going to use the unit for a long period of time, disconnect the AC power adapter.

On Condensation

•  When left in a heated room where it is warm and damp, water droplets or condensation may form

inside the unit. When there is condensation inside the unit, the unit may not function normally. Let 

the unit stand for 1 to 2 hours before turning the power on, or gradually heat the room and allow

the unit to dry before use.

Ventilation Warning

•  Do not block the ventilation openings or holes. If the ventilation openings or holes are blocked by a

newspaper or cloth, etc., the heat may not be able to get out.

•  Do not operate the unit in a confined space, such as a bookcase or built-in cabinet. Allow about 4

inches (10cm) of free space all around the unit for adequate ventilation.

Rating Plate Location

•  The rating plate is located on the bottom of unit.

FCC Statements

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, 

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio 

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful 

interference to radio communications. However, there is no guarantee that interference will not occur in a 

particular installation. If this equipment does cause harmful interference to radio or television reception, 

which can be determined by turning the equipment off and on, the user is encouraged to try to correct 

the interference by one or more of the following measures:

Power Supply

•  Use the provided 12V car power adapter only. Use with other car power adapters could damage the

unit.

•  The 12V car power adapter included with this unit is for its use only. Do not use it with other

equipment.

•  In the interest of traffic safety, do not operate this unit or view videos while driving a vehicle.

•  Make sure the unit is securely fastened to prevent it from falling or flying through the air in the event

of an accident.

•  When the inside of the cigarette lighter socket is dirty with ashes or dust, the plug section may

become hot due to poor contact. Be sure to clean the cigarette lighter socket before use.

•  After use, disconnect the 12V car power adapter from both the unit and cigarette lighter socket.

C. Using the Built-in Battery

The unit has a built-in, non-replaceable, rechargeable battery. Charge the built-in battery before using it 

for the first time. Complete charging typically takes approximately 4-5 hours. The charging light will go

out when the built-in battery becomes fully charged.

•  The built-in battery can only be recharged when the unit is in CHARGE mode while using the AC

power adapter.

•  The built-in battery cannot be recharged when the unit is in ON mode.

•  Do NOT recharge the built-in battery in a vehicle using the car power adapter.

•  Batteries should not be exposed to excessive heat such as sunshine, fire or the like.

•  When the built-in battery power is low, "Battery Low" will display on the screen and the unit will stop

playing.

•  Recharge the built-in battery when you are ready to use it again.

•  While using the built-in battery, the environmental temperature should be 41°F (5°C) to 95°F (35°C).

•  To get the longest service life of the built-in battery, charge at indoor-temperature.

•  The built-in battery in this device may present a risk of fire or chemical burn if mistreated. Do not

disassemble, heat above 212

o

F (100

o

C), or incinerate. 

•  The unit should not be exposed to excessive heat such as sunshine, fire or the like.

•  When discarding the unit, environmental problems must be considered and local rules or laws

governing the disposal of such products must be strictly followed.

Connections

user manual

Read these instructions before using your new product for the first time.

AVC Multimedia, 

Markham, Ontario L3R 1E3

http: //www.RCAav.com

Safety Precautions

The lightning flash with an arrowhead symbol, 

within the equilateral triangle, is intended to alert 

the user to the presence of uninsulated "dangerous

voltage" within the product's enclosure that may be of

sufficient magnitude to cause an electric shock.

The  exclamation  point  within  the  equilateral

triangle is intended to alert the user to the presence 

of important operating and maintenance (servicing) 

instructions in this owner’s manual.

This product contains a 

low power laser device.

Control Reference Guide

Battery Replacement

When the battery becomes weak, the operating distance of the remote control will be greatly reduced and

you will need to replace the battery.

Note: If the remote control is not going to be used for a long time, remove the battery.

WARNING: Do not dispose of the battery in a fire or it may leak and/or explode.

WARNING: Batteries should not be exposed to excessive heat such as sunshine, fire or the like.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent

type.

2.  Insert one CR2025 (3V) size battery.

To Change Remote Battery

1.  Open the battery door.

Using the Remote Control

•  Point the remote control at the REMOTE SENSOR located

on the unit.

•  When using this unit in very bright light, the infrared

REMOTE SENSOR may not work properly.

Remote Control

1.  VIDEO MODE button 

  Adjust Brightness, Screen Size and Contrast

of the LCD screen.

2.

 PREV button

 Move back through titles, chapters or tracks

on a disc.

3.

/   SEARCH buttons

 

 SEARCH: 

 Fast reverse playback.

 

 SEARCH: 

 Fast forward playback.

4.  GOTO button

 Skip directly to a location on a CD/DVD.

5.  Cursor ( ,  ,  ,  ) buttons 

  Move between selections on a menu screen 

and adjust certain settings.

  ENTER button 

  Confirm selections on a menu screen.

6.  MEMORY button  

 Set titles/chapters in a favorite order.

7.  Number (0 - 9) buttons

  Use when creating programs or locating a 

title/chapter/track or specific time.

8.  REPEAT A-B button

 Perform point-to-point repeat playback on a

DVD or CD.

  REPEAT DISC button

  Repeat a DVD chapter or title.

 Repeat a CD track or the whole disc.

  SETUP button

  In Stop Mode, press to display the unit’s 

SETUP menu.

–  Reorient or relocate the receiving antenna.

–  Increase the separation between the equipment and receiver.

–  Connect the equipment into an outlet on a circuit different from that to which the receiver is 

connected.

–  Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

Notes on Copyright

It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public, or rent copyrighted 

material without permission.

Apparatus Claims of U.S. Patent Nos. 6,836,549; 6,381,747; 7,050,698; 6,516,132 and 5,583,936 licensed for

limited viewing uses only.

This product incorporates copyright protection technology that is protected by U.S. patents and 

other intellectual property rights. Use of this copyright protection technology must be authorized by

Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized

by Macrovision. Reverse engineering or disassembly is prohibited.

1.  Read these instructions.

2.  Keep these instructions.

3.  Heed all warnings.

4.  Follow all instructions.

5.  Do not use this apparatus near water.

6.   Clean only with a dry cloth.

7.  Do not block the ventilation openings. Install in accordance with the manufacturer's instructions.

8.   Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus 

(including amplifiers) that produce heat.

9.  Do not defeat the safety purpose of a polarized or grounding - type plug. A polarized plug has two

blades with one wider than the other. A grounding type plug has two blades and a third grounding 

prong. The wide blade or the third prong  are provided for your safety. If the provided plug does 

not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.  Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

11.  Only use attachments/accessories specified by the manufacturer.

12.  Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer,

or sold with the apparatus. When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

13.  Unplug this apparatus during lightning storms or when unused for long periods of time.

14.  Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been

damaged in any way, such as the AC power cord or plug is damaged, liquid has spilled or objects 

have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

The unit can play back

 

Region Management Information

Region Management Information: This unit is designed and manufactured to respond to the Region 

Management Information that is encoded on DVDs. If the region number printed on the DVD does not 

correspond to the region number of this unit, it cannot play that disc.

The region number of this unit is 1.

DVDs

[8cm/12cm disc]

Compatible

Audio CDs

[8cm/12cm disc]

Disc Function or Operation That is Not Available

When the symbol appears on the screen, it indicates the function or operation attempted is not available 

at that time. This occurs because the DVD manufacturer determines the specific functions of DVDs. Certain 

functions may not be available on some DVDs. Be sure to read the documentation provided with the DVD. 

Icons Used on DVDs

Sample lcons

When playing back a CD-G (Graphics) or CD EXTRA disc,

the audio portion will be played, but the graphic images 

will not be shown.

Language selections for audio
Language selections for subtitles
Screen aspect ratio
Multiple camera angles
Region code indicator

Titles, Chapters and Tracks

•  DVDs are divided into “titles” and “chapters”. 

If the disc has more than one movie on it, each 

movie would be a separate “title”. “Chapters” 

are sections of titles.

•  Audio CDs are divided into “tracks”. A “track” is 

usually one song on an Audio CD.

Note: Numbers identify each title, chapter, and track on a disc. Most discs have these numbers recorded

on them, but some do not.

Note on Unauthorized Discs

you may not be able to play some DVDs on this unit, particularly if they were purchased from outside your 

geographic area or made for business purposes.

E - 1

E - 2

E - 3

E - 4

E - 5

1.  LCD screen

2.  DC IN 9V - 12V jack

3.  AUDIO / VIDEO OUT jack

4.  CHARGE  / STANDBY / ON switch

5.  VOLUME control

  Adjusts the volume.

6.  Headphone jack

7.   STOP button 

  Press to stop playing a disc.

  MENU button

  Accesses  DVD  Disc  Menu  if  DVD  disc  is 

currently playing.

  Accesses Setup menu if disc is not playing.

 

 button 

 Press to start or resume playback of a disc.

 Pressing during playback of a disc will cause

playback to be paused.

 

 SEARCH button

 Press  to  perform  fast  forward  playback

during CD playback.

  In DVD Menu or Setup Menu, press to scroll 

up.

 

 PREV button

 Press  to  go  back  to  the  previous  title  /

chapter / track.

  In DVD Menu or Setup Menu, press to scroll 

left. 

Unit

 

 NEXT button

 Press to advance titles / chapters / tracks.

  In DVD Menu or Setup Menu, press to scroll 

right.

 

 SEARCH button

 Press to perform fast reverse playback during

CD playback.

  In DVD Menu or Setup Menu, press to scroll 

down.

8.  Disc Door

  Push to close the disc door.

9.  OPEN knob

 Press the open knob to open the disc door.

10.Remote sensor

 Senses the remote control's signals.

11.ON indicator

12.CHARGING indicator

  Charge  the  rechargeable  battery  before 

using it for the first time. Complete charging 

typically takes approximately 4-5 hours. The

charging light will go out when the battery 

becomes fully charged.

Turning on the Unit 

1.  Slide the CHARGE / STANDBY / ON switch on the left side of the unit to the 

ON position.

2.  The start-up picture will appear on the screen.

3.  After use, slide the CHARGE / STANDBY / ON switch to the STANDBy (power 

off) position. 

Remove the 

PLASTIC sheet 

before USING the 

Remote Control.

9.  MENU button

Enter and exit the main DVD Menu.

10.

 NEXT button

Skip to next title, chapter or track on a disc.

11.   STOP button

 

Stop playing a disc.

        PLAY button

Start or resume playback of a disc.

        PAUSE button

Press  once  to  pause  playback.  Press

subsequently to advance frame by frame on 

a DVD.

12. DISPLAY button

  Show status information on the screen.

13. ANGLE button 

  Switch between multiple camera angles if 

applicable to the DVD.

14. AUDIO button 

 Select one of the audio sound tracks on a

DVD (if more than one is available) or select 

the audio output mode on a CD.

15. SUBTITLE button  

  Select  one  of  the  subtitle  languages 

programmed on a DVD (if available).

  RETURN button  

   Return to normal operation after using the 

SETUP menu of a DVD.

DRC99310KB Blue

DRC99310KR Red

DRC99310KP Purple

Important Safety Instructions

Disc Formats

A. Using the AC Power Adapter

•  The AC power adapter included with this unit is for its use only. Do not use it with other equipment.

•  When the unit is not going to be used for long time, disconnect the AC power adapter from the wall outlet.

•  When the AC power adapter is plugged in, the apparatus is not completely disconnected from the

main power supply, even when the power is turned off.

The AC/DC adaptor is used as disconnect device. The AC/DC adaptor of apparatus should not be

obstructed OR should be easily accessed during intended used. To be completely disconnect the power 

input, the AC/DC adaptor of apparatus shall be disconnected from the mains.

The supplied AC power 

adapter operates on AC 

100-120V. 

Disconnect  the  car  power 

adapter when not in use. Not 

for use in 24V vehicles.

B. Using the Car Power Adapter

The 12V car power adapter

allows the unit to be used 

with vehicles that have a 12V,

negative ground electrical 

system.

1.  Turn on the unit.

2.  Turn on the TV and follow the instructions included with it to watch video from external sources.

A. Connecting a TV

If your TV has audio/video inputs, you can connect the unit to your TV using standard Audio/Video cables.

(not included) 

B. Using Headphones/Earphones

•  Turn down the volume before connecting, and then adjust the level.

•  When headphones/earphones are connected, no sound will be emitted from the unit's speaker.

(3.5mm diameter plug) (included)

(included)

Avoid listening to sound at levels which may be harmful to your ears.

Remote Control

Accessories

Please check and identify the supplied accessories.

   Remote Control (with battery)................................................................................................................................... x 1
 AC Power Adapter........................................................................................................................................................... x 1
  Car Power Adapter..........................................................................................................................................................x 1
  Earphone ............................................................................................................................................................................x 2
  Headphone Splitter ........................................................................................................................................................x 1
  Carrying Bag......................................................................................................................................................................x 1

DRC99310K_ENGLISH IB 7pt_594x297mm.indd   1

2010-6-18   16:17:10