Sharp DV-L70BL User Manual

MAX

MIN

Lower

Higher

• Never try to open the disc compartment cover and look inside the disc

compartment at the laser while a disc is playing. Doing so creates the
danger of serious eye damage.

• Do not press down on the disc compartment cover while a disc is playing.
• Keep the disc compartment cover closed except when loading or

removing a disc. Otherwise, dust getting into the DVD player can lead to
malfunction.

• The indicator 

 appears on the display if the disc you are using is damaged,

if you load the disc upside-down, or if the region number of the disc you are
using is one that is not supported by this disc player. If the above indicator
appears, remove the disc from the player and take the proper corrective action.

• Disc scratches, noise, or other factors can cause temporary problems with the

video image from a DVD or video CD. If this happens, press 

 to jump

ahead to where play returns to normal.

Rotate the volume dial on the right side of the
DVD player to adjust the volume level of the
audio within a range of 0 to 10.

• A safety feature automatically turns off DVD player power if you set the volume

level too high while playing certain types of discs. If this happens, lower the
volume level and restart play.

Press 

Ë

 STOP.

• If you do not perform any operation for about five minutes after stopping disc

play, indicator 

 disappears from the screen and the DVD player goes into its

Standby mode.

• All buttons except 

 are disabled in the Standby mode.

• To restore full power from the Standby mode, slide the main power switch to the

“OFF” position and then back to “ON” again, or press 

.

• You can also restore full power from the Standby mode by pressing 

 on

the DVD player’s control panel.