Polaroid PDV-0560M User Manual

32 

No TFT LCD display 

Make sure the power is on. 

LCD is very bright or dark. 

Use the BRIGHT +/- on the control panel to 
adjust the brightness. 

Colors of picture are faded or 
bloomy. 

Use the COLOR +/- on the control panel to 
adjust the color. 

The player does not play discs 
or the display shows: no disc. 

Make sure a disc is loaded. 
Make sure the disc isn’t loaded upside down. 
Disc should be clean, not dirty or warped. 
Player’s region code should be the same as 
region code of DVD disc. 
Has water condensation occurred?   

If it has, remove the disc. Keep the disc and  

the player powered up for about one hour. 

No sound. 

Make sure the volume is not set to minimum. 
Make sure the headphone is not connected. 
Make sure the player is not in pause status. 

Disc skips and will not continue 
to play. 

Make sure the player is not in A-B repeat status. 
Is the disc dirty or warped?   
If so, clean disc or press the GOTO button to 
skip to next chapter. 

The remote control does not 
work. 

Make sure there aren’t any obstructions 
between the remote and the player. 
Make sure you are pointing the remote control at 
the player. 
Make sure batteries are inserted correctly. 
Replace weak batteries. 

 
 
Other possibilities： 
Static or other external interference may cause the player to function abnormally. In this 
circumstance unplug the power-supply cord from the outlet and plug it in again to reset 
the player so that normal operation can resume. If you are still having problems, 
disconnect the power and consult the nearest authorized service center.