Panasonic AJ-HPM100P User Manual

Page of 152
98
Using USB Connectors and SD/SDHC Memory Cards: Using This Unit With a Hard Disk
Using This Unit With a Hard Disk
This unit supports the following hard disks types. 
• Panasonic portable hard disk unit P2 store (AJ-PCS060G)
• A hard disk that supports the USB 2.0 interface
Available functions depend on the type of hard disk used. In 
the host mode, “PARTITION:” in the left half of the Explorer 
screen provides information on the hard disk that is 
connected to the unit. 
◆ NOTE: 
• This unit supports USB bus power (5 V, 0.5 A) but some hard disks 
may not be able to use USB bus power. Use a separate power 
supply with hard disks that do not support USB bus power.
• This unit does not support hard disks that are 2 TB (2048 GB) or 
larger. 
◆ NOTE: 
• Use hard disks under the following conditions. 
1) Operate hard disks within its operating specifications 
(temperature, etc.). 
2) Do not use hard disks in locations that are unstable or exposed to 
vibration. 
• Some hard disks may not operate normally. 
• Use a hard disk with sufficient space for copying. 
• Do not connect a hard disk to hubs or other connections that involve 
multiple units even if it is not powered on. Do not use other devices 
that are connected via hubs with a hard disk. 
• During formatting and copying, do not disconnect cables, do not 
remove a P2 card that is involved in any of these activities and do 
not power off this unit and the hard disk. Otherwise this unit and the 
hard disk must be rebooted. 
• A hard disk is a precision instrument whose read and write functions 
may fail in some operating environments. 
Please note that Panasonic accepts no liability whatsoever for data 
loss or other losses either direct or indirect arising from hard disk 
damage or other defects. 
• When data from this unit is copied to a hard disk and is managed on 
another PC, the data can no longer be guaranteed to work in this unit 
and the integrity of the hard disk data cannot be guaranteed, either. 
• Repair bad clips on P2 cards before copying them to a hard disk. 
• Clips on hard disks cannot be played back. 
• SATA (serial ATA) or PATA (parallel ATA) interface hard disks 
connected using a USB cable may not be recognized. 
Supported Hard Disks
Hard Disk Types and Available Functions
Hard disk type
Features
available functions
TYPE S
A special format that permits high-speed loading of 
and writing in card units. This unit uses this format for 
formatting.
Loading and writing in card units, thumbnail display, 
loading and formatting in clop units.
P2STORE
This is a P2 store (AJ-PCS060G). It cannot be written 
to.
Loading in card units, thumbnail display, loading in 
clip units. 
FAT
The basic primary partition on a PC is FAT 16 or FAT 
32 that require a CONTENTS directory created in its 
foot directory.
Thumbnail display, loading in clip units, formatting
* After formatting on this unit, the card is handled as a 
“TYPE S” hard disk. 
OTHER
Hard disk other than those above
*  If root does not contain a directory called 
“CONTENTS” or if a file system other than NTFS, 
FAT16 or FAT32 is used. 
Formatting
* After formatting on this unit, the card is handled as a 
“TYPE S” hard disk.