Panasonic RQT8218-P User Manual

Page of 24
3
R
Q
T
8218
THE FOLLOWING APPLIES ONLY IN THE U.S.A. AND CANADA
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
Except for U.S.A. and Canada
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR 
PERFORMANCE OF PROCEDURES OTHER THAN 
THOSE SPECIFIED HEREIN MAY RESULT IN 
HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR 
YOURSELF. REFER SERVICING TO QUALIFIED 
PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE, 
ELECTRIC SHOCK OR PRODUCT 
DAMAGE, DO NOT EXPOSE THIS 
APPARATUS TO RAIN, MOISTURE, 
DRIPPING OR SPLASHING AND THAT 
NO OBJECTS FILLED WITH LIQUIDS, 
SUCH AS VASES, SHALL BE PLACED 
ON THE APPARATUS.
The socket outlet shall be installed near the equipment 
and easily accessible or the mains plug or an 
appliance coupler shall remain readily operable.
The lightning flash with arrowhead 
symbol, within an equilateral triangle, is 
intended to alert the user to the presence 
of uninsulated “dangerous voltage” within 
the product’s enclosure that may be of 
sufficient magnitude to constitute a risk of 
electric shock to persons.
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an 
equilateral triangle is intended to alert the 
user to the presence of important 
operating and maintenance (servicing) 
instructions in the literature accompanying 
the appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
This equipment has been tested and found to comply 
with the limits for a Class B digital device, pursuant to 
Part 15 of the FCC Rules.
These limits are designed to provide reasonable 
protection against harmful interference in a residential 
installation. This equipment generates, uses and can 
radiate radio frequency energy and, if not installed and 
used in accordance with the instructions, may cause 
harmful interference to radio communications. However, 
there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause 
harmful interference to radio or television reception, 
which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and 
receiver.
Connect the equipment into an outlet on a circuit 
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV 
technician for help.
Any unauthorized changes or modifications to this 
equipment would void the user’s authority to operate 
this device.
This device complies with Part 15 of the FCC Rules. 
Operation is subject to the following two conditions: (1) 
This device may not cause harmful interference, and 
(2) this device must accept any interference received, 
including interference that may cause undesired 
operation.
(Inside of product)
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A 
BOOKCASE, BUILT-IN CABINET OR IN ANOTHER 
CONFINED SPACE. ENSURE THE UNIT IS WELL 
VENTILATED. TO PREVENT RISK OF ELECTRIC 
SHOCK OR FIRE HAZARD DUE TO 
OVERHEATING, ENSURE THAT CURTAINS AND 
ANY OTHER MATERIALS DO NOT OBSTRUCT 
THE VENTILATION VENTS.
DO NOT OBSTRUCT THE UNIT’S VENTILATION 
OPENINGS WITH NEWSPAPERS, 
TABLECLOTHS, CURTAINS, AND SIMILAR 
ITEMS.
DO NOT PLACE SOURCES OF NAKED FLAMES, 
SUCH AS LIGHTED CANDLES, ON THE UNIT.
DISPOSE OF BATTERIES IN AN 
ENVIRONMENTALLY FRIENDLY MANNER.
THIS UNIT IS INTENDED FOR USE IN MODERATE 
CLIMATES.
This product may receive radio interference caused by 
mobile telephones during use. If such interference is 
apparent, please increase separation between the 
product and the mobile telephone. 
CLASS 1
LASER PRODUCT
RQT8218-P.fm  Page 3  Thursday, April 21, 2005  10:08 AM