Sharp GX-M10H(RD) User Manual
20
Timer and sleep operation (Remote
control only) (continued)
control only) (continued)
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To reuse
the same setting, perform the following operations.
The timer setting will be memorised once it is entered. To reuse
the same setting, perform the following operations.
1 Turn the power on and press and hold down the CLOCK/TIMER
button.
2 Within 10 seconds, press the
or
button to select
“ONCE” or “DAILY”, and press the ENTER button.
3 Within 10 seconds, press the
or
button to select
“TIM.ON” , and press the ENTER button.
4 Press the ON/STAND-BY button to enter the power stand-by
mode.
Sleep operation
The radio, compact disc, iPod, USB, and Audio In function can all
be turned off automatically.
be turned off automatically.
1 Play back the desired sound source.
2 Press the SLEEP button.
3 Within 5 seconds, press the Numeric button to set the time. (1
2 Press the SLEEP button.
3 Within 5 seconds, press the Numeric button to set the time. (1
minute ~ 99 minutes)
4 “SLEEP” will appear.
5 The unit will enter the power stand-by mode automatically after
5 The unit will enter the power stand-by mode automatically after
the preset time has elapsed. The volume will be turned down 1
minute before the sleep operation fi nishes.
minute before the sleep operation fi nishes.
To confi rm the remaining sleep time:
1 Whilst “SLEEP” is indicated, press the SLEEP button.
1 Whilst “SLEEP” is indicated, press the SLEEP button.
To cancel the sleep operation:
Press the ON/STAND-BY button whilst “SLEEP” is indicated. To
cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
Press the ON/STAND-BY button whilst “SLEEP” is indicated. To
cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
1 Whilst “SLEEP” is indicated, press the SLEEP button.
2 Within 5 seconds, press the “0” button twice until “SLEEP 00”
2 Within 5 seconds, press the “0” button twice until “SLEEP 00”
appears.
To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
1 Set the sleep time (see above, steps 1 - 5).
2 Whilst the sleep timer is set, set the timer playback (steps 2 - 9,
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
1 Set the sleep time (see above, steps 1 - 5).
2 Whilst the sleep timer is set, set the timer playback (steps 2 - 9,
page 19).
Sleep timer
setting
setting
Timer playback
setting
setting
End time
1-99 minutes
Desired time
Sleep operation will
automatically stop
Timer playback start time
Troubleshooting chart
Many potential problems can be resolved by the owner without
calling a service technician.
calling a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
calling your authorised SHARP dealer or service centre.
General
Symptom
Possible cause
z The clock is not set to
the correct time.
z A power failure occured.
z Reset the clock. (Refer page 6)
z When a button is
pressed, the unit does
not respond.
not respond.
z Set the unit to the power
stand-by mode and then turn
it back on.
it back on.
z If the unit still malfunctions,
reset it. (Refer page 21)
z No sound is heard.
z The volume level is set to
“MIN”.
z The headphones are
connected.
z Sound too low or
distorted.
z Power suddenly shuts
down.
z The batteries are depleted.
Change the batteries.
CD player
Symptom
Possible cause
z Playback does not start.
z Playback stops in
the middle or is not
performed properly.
performed properly.
z The disc is loaded upside
down.
z The disc does not satisfy the
standards.
z The disc is distorted or
scratched.
z Playback sounds are
skipped, or stopped in
the middle of a track.
the middle of a track.
z The unit is located near
excessive vibrations.
z A very dirty disc has been used.
z Condensation has formed
inside the unit.
z Volume level is too high. Adjust
to lower volume.
Remote control
Symptom
Possible cause
z The remote control does
not operate.
z The AC power lead of the unit is
not plugged in.
z Wrong battery polarity.
z The batteries are exhausted.
z The distance or angle is
incorrect.
z The remote control sensor
receives strong light or sunlight.
Tuner
Symptom
Possible cause
z The radio makes
unusual noises
continuously.
continuously.
z The unit is placed near the TV
or computer.
z The FM aerial is not properly
extended or positioned.
GX-M10H_OM_UK_SCA.indd Sek1:20
GX-M10H_OM_UK_SCA.indd Sek1:20
2012-08-17 00:07:55
2012-08-17 00:07:55