Sony RCD-W7V User Manual

RCD-W7V 4-236-407-

(1)

Settings and Adjustment

• Dolby Digital/PCM

Select this when connecting to an AV
receiver or other equipment equipped with
a Dolby digital (AC-3) decoder or a Dolby
Pro Logic Surround decoder.

• Stream/PCM

Select this when connecting to an AV
receiver or other equipment euipped with a
DTS decoder or an MPEG decoder.

• PCM

Select this when connecting to an audio
system without a Dolby Digital(AC-3),
DTS or other decoder.

To turn off the SETUP Menu
Press RETURN or H (PLAY).

Note

• When this recorder is playing a CD that sampling

frequency is 96 kHz, the signal of DIGITAL
OPTICAL OUT jack is converted and outputed as
48 kHz. And the signal of ANALOG OUT (L/R)
jack is converted as analog signal and outputed as
96 kHz.

Selecting the Digital Audio Output

Each DVD disc has a variety of audio output
options. Set the Digital Audio Output of the
unit according to the type of audio system
you use.

CAUTION

If the AV amplifier is not equipped with
a Dolby Digital decoder, do not select
“DOLBY DIGITAL/PCM or Stream/
PCM” in the “Digital Audio Output”
when connecting the AV amplifier with
an optical connecting cord.
Merely attemping to paly a DVD may
cause a high level of noise wihch could
be harmful to your ears and damage the
speakers. In such a case, be sure to select
“PCM”.

Follow steps 1 and 2 of “Selection
of initial settings” on page 40.

The setup menu is displayed.

Press

X/x to select “Digital Audio

Output”.

Press

c and then press X/x to

select the desired output press
ENTER.

Disc Audio
Disc Subtitle
Disc Menu
Menu Language

/PCM

DOLBY
DIGITAL

Stream/PCM

PCM

Rating
Password

TV Aspect

Others

Digital Audio Output

Press to select Press ENTER button

OUTPUT

Playable
Disc

Stream/
PCM

Dolby Digital/
PCM

PCM

96 kHz
Linear
PCM DVD

PCM

DTS bit
Stream

Not output

PCM

Dolby Digital
bit Stream

DTS
DVD

Dolby
Digital
DVD

PCM

MPEG
bit Stream

MPEG
DVD

PCM

Audio
CD

*RCD-W7V.p65_40-45

12/9/01, 6:10 PM