Sony DSR-11 User Manual

Page of 61
WARNING
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Owner's record
The model number is located at the rear and front of the unit
and the serial number on the rear Record the serial number
in the space provided below Refer to these numbers
whenever you call upon your Sony dealer regarding this
product
Model No DSR-11 Serial No. _______________
CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
For customers in the U.S.A.
I f you have any questions about this product, you may
call: Sony's Business Information Center (BIC) at 1-800-
686-SONY (7669)
or Write to: Sony Customer Information Services Center
6900-29 Daniels Parkway, PMB 330 Fort
Myers, Florida 33912
This symbol is intended to alert the user to the
presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons
This symbol is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance
Trade Name.
Model
Responsible Party:
Address.
Telephone Number
Declaration of Conformity
SONY
DSR-11
Sony Electronics Inc
1 Sony Drive, Park Ridge,
NJ 07656  U S A
201-930-6972
The AC adaptor must be changed only at qualified service
shop
The nameplate of the AC adaptor is located on its bottom
For customers in Europe
This product with the CE marking complies with both the
EMC Directive (89/336/EEC) and the Low Voltage Directive
(73/23/EEC) issued by the Commission of the European
Community
Compliance with these directives implies conformity to the
following European standards
• EN60065 Product Safety (supplied AC adaptor)
• EN55103-1 Electromagnetic Interference (Emission)
• EN55103-2 Electromagnetic Susceptibility (Immunity)
This product is intended for use in the following
Electromagnetic Environments)
E1 (residential), E2 (commercial and light industrial), E3
(urban outdoors) and E4 (controlled EMC environment, ex
TV studio)
For the customers in the Netherlands
Voor de klanten in Nederland
This device complies with Part 15 of the FCC Rules
Operation is subject to the following two conditions (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation
BI) dit product zijn batterijen
geleverd Wanneer deze leeg
zi]n, moet u ze met weggooien
maar inleveren als KCA
2