Sony RCD-W2000ES Manual
Recording/Editing
33
MENU/NO
.
/
>
x
m
/
M
CLEAR
YES
DECK A/DECK B
NAME EDIT/
SELECT
SELECT
TOC
CD TEXT
CD - RW
DECK A
REC
DISC
ALBUM
TRACK
TRACK
DECK B
DISC
TRACK
Display
Selected AB
Selected ab
Selected 12
TOC
CD TEXT
CD - RW
DECK A
DISC
ALBUM
TRACK
TRACK
DECK B
DISC
TRACK
TOC
CD TEXT
CD - RW
DECK A
DISC
ALBUM
TRACK
TRACK
DECK B
DISC
TRACK
Letter/number/
symbol buttons
symbol buttons
Labeling Tracks/Discs Z
You can create titles for tracks/discs for a
recorded CD-R or CD-RW with capital and
small letters, numbers, and symbols. You can
enter a disc name of up to 70 characters, and a
track name of up to 70 characters per track, for
40 tracks per disc.
recorded CD-R or CD-RW with capital and
small letters, numbers, and symbols. You can
enter a disc name of up to 70 characters, and a
track name of up to 70 characters per track, for
40 tracks per disc.
Label the track/disc before finalizing it. You
cannot label the track/disc on a finalized disc.
cannot label the track/disc on a finalized disc.
After labeling, you must finalize the disc before
you remove the disc or turn off the unit.
Otherwise, the titles will be cleared.
you remove the disc or turn off the unit.
Otherwise, the titles will be cleared.
When using the remote, set DECK A/DECK B
to DECK B.
to DECK B.
1
Place a CD-R or CD-RW disc that has
not been finalized in DECK B.
not been finalized in DECK B.
2
Press NAME EDIT/SELECT while the
unit is stopped.
unit is stopped.
“Name In?” appears in the display.
3
Press YES.
4
Press
.
/
>
to select the disc or
track you want to label.
When you label the disc name, select
“Disc,” and when you label the track name,
select the track number.
“Disc,” and when you label the track name,
select the track number.
5
Press YES.
A flashing cursor appears.
6
Press NAME EDIT/SELECT repeatedly
to select the character type as follows:
to select the character type as follows:
To select
Capital letters and symbols*
Small letters and symbols*
Numbers
* You can use the following symbols in titles:
’ – / , . ( ) : ! ? & + < > _ = ” ; # $ % @
* `
To enter a space, press 10/0.
7
Press a letter/number/symbol button to
enter a character.
enter a character.
To enter a number, press the number button
you want.
To enter a letter or symbol,
1 Press the corresponding letter button
you want.
To enter a letter or symbol,
1 Press the corresponding letter button
repeatedly until the letter or symbol you
want flashes. You can also enter a letter
or symbol by pressing ./>
repeatedly. To select the symbol, press
> repeatedly after flashing “’”.
want flashes. You can also enter a letter
or symbol by pressing ./>
repeatedly. To select the symbol, press
> repeatedly after flashing “’”.
2 Press M.
8
Repeat steps 6 and 7 until you have
entered the entire title.
entered the entire title.
If you enter an incorrect character, press
m or M until the incorrect character
starts flashing.
Press CLEAR to erase the incorrect
character, then enter the correct one.
m or M until the incorrect character
starts flashing.
Press CLEAR to erase the incorrect
character, then enter the correct one.
9
Press YES.
“Complete !” appears in the display for a
few seconds and the track or disc is labeled.
Finalize the disc before you remove the disc
or turn off the unit. Otherwise, the titles will
be cleared.
few seconds and the track or disc is labeled.
Finalize the disc before you remove the disc
or turn off the unit. Otherwise, the titles will
be cleared.
To cancel labeling
Press MENU/NO or x.
continued