Sony DAV-FC9 Manual

Page of 92
Ge
tting Star
te
d
23
US
For the best possible surround sound, all the 
speakers other than the subwoofer should be the 
same distance from the listening position (A). 
However, this system allows you to place the 
centre speaker up to 1.6 metres a) closer (B) 
and the surround speakers up to 4.6 metres b) 
closer (C) to the listening position.
The front speakers can be placed from 1.0 to 
7.0 metres c) (A) from the listening position.
North American numerical equivalents:
a) 5 feet (1.5 metres)
b) 15 feet (4.5 metres)
c) 3 to 23 feet (0.9 to 6.9 metres)
Place speakers as illustrated below
Note
Do not place the centre and surround speakers farther 
away from the listening position than the front 
speakers.
About magnetically shielded 
speakers (to prevent colour 
irregularity occurring on the TV 
screen)
The subwoofer in this system is magnetically 
shielded to prevent magnetic leakage. However, 
some leakage may occur, as a high-strength 
magnet is employed. If the subwoofer is used 
with a CRT-based TV or projector, install the 
subwoofer at least 0.3 metre (1.0 foot) from the 
TV set. If it is installed too close, colour 
irregularity may occur on the screen. If colour 
irregularity occurs, turn off the TV set once, then 
turn it on after 15 to 30 minutes. If colour 
irregularity occurs again, place the subwoofer 
farther away from the TV set. If colour 
irregularity still occurs after performing the 
above, make sure that no magnetic object is 
placed near the subwoofer. Colour irregularity 
may occur as a result of interaction between the 
subwoofer and the magnetic object. 
Examples of possible sources of magnetic 
interference include: magnetic latches on a TV 
stand, etc., healthcare devices, toys, etc.
Specifying the speaker 
parameters
To obtain the best possible surround sound, first 
specify the distance of the speakers from your 
listening position, then set the level and balance. 
Use the test tone to adjust the speaker level and 
balance to the same level.
Select “SPEAKER SETUP” in the setup 
display. For details, see “Setting for the 
Speakers” (page 71).
Speaker Setup