Sonic Blue P/NTS1GMP520 User Manual

 The T.sonic™ 520 will not be able to support the maximum recording capacity described in the above 

table if the memory space and/or the battery power level are smaller than shown on the table. 

There are 3 kinds of the voice source for recording: FM, Line-In, and the built-in Microphone. 

About the FM recording, the previous section has already mentioned. 

As for how to select the voice source ( Line-In or the built-in Microphone ) for recording, please see the 

sub-section “Select Recording Device Mode” of the section “Settings” for details. 

1.  After finishing selecting the device for recording, we should enter into the MUSIC mode or the VOICE 

mode (this will be discussed in the later section). 

2.  Notice that you should not play any files before recording. 

3. Press 

the 

A-B/REC 

  button, and then the voice from the selected device will start recording. 

4.  If you select the Line-In to be the recording device. On the display, a recording Line-In file is generated 

and placed in the folder name of [/LINEIN.DIR/]. The recording file name sequence starts at 

[LINE0001.WAV], then [LINE0002.WAV], and so forth. 

 

5.  If you select the built-in Microphone to be the recording device. On the display, a recording Microphone 

file is generated and placed in the folder name of [/MICIN.DIR/]. The recording file name sequence starts 

at [MIC00001.WAV], then [MIC00002.WAV], and so forth. 

 

6. Press the PLAY-PAUSE/PWR ON 

 button to pause the recording, and press the 

PLAY-PAUSE/PWR ON 

  button again to continue. 

7. Press the Menu Switch inwards (Menu) 

 or the A-B/REC 

  button to stop the recording 

and the OLED Display will return to the pervious MUSIC mode or the VOICE mode. 

 

Sample rate 

Channels 

512MB 

1GB 

8 KHz 

2（stereo） 

16 hrs 

32 hrs 

16 KHz 

2（stereo） 

8 hrs 

16 hrs 

Line-In Record 

32 KHz 

2（stereo） 

4 hrs 

8 hrs 

 

 

12