Tascam da3000 User Manual

TASCAM DA-3000

6 − Playback

NOTE

To cancel marked deletion, press the EXIT/CANCEL [PEAK

CLEAR] button.

Setting the PLAY Mode

Setting the PLAY mode.
1. Press the MENU button to open the menu screen

PLAY

FUNC

page, and turn the MULTI JOG dial to select

PLAY

MODE

2. Press the MULTI JOG dial to open the

PLAY MODE

screen.

3. Turn the MULTI JOG dial to select the Play mode.

Options: “CONTINUE” (default) - Continues to play all tracks

from track 1 through to the last one.
“SINGLE” - Plays only the currently selected track.

4. Press the MULTI JOG dial to confirm the selection and return

to the menu screen.

NOTE

By using the combination of Repeat Playback and Play

Mode =

SINGLE

, a single track can be looped endlessly.

Repeat playback

You can set the unit to play tracks repeatedly.
1. Press the MENU button repeatedly to open the

PLAY

FUNC

menu, and turn the MULTI JOG dial to select

REPEAT

2. Press the MULTI JOG dial to open the

REPEAT

screen.

3. Turn the MULTI JOG dial to select the repeat playback mode.

Options:

OFF (default): Repeat playback disabled

ON:

Repeat playback enabled

4. Press the MULTI JOG dial to confirm the selection and return

to the menu screen.

5. After completing the setting, press the HOME/DISPLAY

button (or remote control F2 button) to return to the Home

Screen.

6. Select the track that you want to play back repeatedly and

start playback.

Setting gapless playback mode

You can set the unit so that gaps (silent intervals) between tracks

during playback are eliminated.
If you want audio data, including tracks recorded using the

auto track and track increment functions, to play back continu-

ously without gaps between tracks, set the track gap mode to

GAPLESS

. When the track gap mode is

NORMAL

, brief silences

will occur between tracks.
1. Press the MENU button to open the menu screen

PLAY

FUNC

page, and turn the MULTI JOG dial to select

TRACK

GAP

2. Press the MULTI JOG dial to open the

TRACK GAP

screen.

3. Turn the MULTI JOG dial to select the track gap mode.

Options: NORMAL (default), GAPLESS

4. Press the MULTI JOG dial to confirm the selection and return

to the menu screen.

CAUTION

• If

GAPLESS

is selected during DSD file playback

Depending on the status of the audio data, noise might

occur at the division between tracks due to the nature

of DSD files. If the noise is bothersome, set the track gap

mode to

NORMAL

to avoid it. (Noise will not occur during

the gapless playback of audio from tracks created using

this unit’s auto track and track increment functions, for

example.)

• When using the cascade function

Set both the master and slave units to the same track mode.

If the units do not have the same setting, they will not be

able to synchronize when tracks change. When the track

gap mode is set to

NORMAL

, since the slave unit waits for a

playback start signal from the master unit after each track

ends, if the slave unit is played by itself, each time a track

ends, playback will pause at beginning of the next track.