Tascam DR-1 User Manual

w

 

Status of playback control function settings

These show whether the various playback control 

functions (speed control, key change, part cancel) 

are currently active. When they are active, their 

icons appear as light letters on a dark background 

(

, 

, 

). (See “Special Playback Control 

Functions” on page 29.)

e

 

Effect status

 

Shows whether the effect function is ON or OFF. 

When the effect is ON, the 

 icon appears as 

light letters on a dark background.

r

 

Input monitor setting status

This shows the 

MONITOR 

ON/OFF status as set 

on the Input Setting Screen.
When 

MONITOR

 is ON, the 

 icon appears as 

light letters on a dark background.

  Recording 

  Recording paused 

 

Recording stopped 

2

 

Elapsed recording time

 

The elapsed recording time of the track appears as 

hours: minutes: seconds. 
During recording standby, the maximum 

remaining recording time appears. 

3

 

Remaining recording time

 

The remaining recording time appears in hours: 

minutes: seconds. 

4

 

Record level meter

 

The input signal level of the selected input appears 

as separate L and R channels. 

5

 

Input selection

Shows the input source. 

6

 

File name

 

Shows the file name that is automatically assigned 

to the file being recorded. 

7

 

Record mode

 

Shows the recording file type and sampling 

frequency. During overdubbing, the playback file 

information (file name or MP3 ID3 tag) appears. 

8

 

INT/MIC1 setting status

 

Shows the status of settings related to the built-

in microphone and MIC 1 input (stereo recording, 

plug-in power, low cut filter and level control).

This screen opens when you press the 

REC/PAUSE

 key 

to start recording standby mode and stays open when 

you press the 

REC/PAUSE

 key again to start recording.

This status of the power and the effect use appears the 

same as on the Home Screen. This screen also shows 

the following. 1 

Recorder operation