JVC CU-VS100U User Manual

Before you request repairs, check the items in the table below once more.

If there is still a problem, contact the store where you purchased this product or your nearest JVC service outlet. 

■ If the player is malfunctioning, reset the player.

1.  Turn the player off  by pressing and holding power (

) on the player for at least 10 seconds.

2.  Press the power (

) to turn the player back on.

Gener

al

The player won't 

turn on.

● Ensure that you are using the special power cable provided and that it is connected cor-

rectly. (P.6)

The player won't 

work.

● Press and hold power (

) on the player for at least 10 seconds to reset the player. (The 

player automatically turns off .)

The screen 

freezes during 

SETUP.

The player or its 

power cable is 

warm.

● If used for an extended period, the player and its power cable become warm. This is normal 

and does not indicate a fault.

● If the player or power cable becomes abnormally hot, disconnect the power cable and con-

tact the store where you purchased this product or your nearest JVC service outlet.

Pla

yback

There is no image 

on the TV.

● Connect the player to the TV. (P.6)

● On a TV equipped with A/V input jacks, switch to the external input for the connection with 

the player.

● The content type is not supported by the player and is not recognized.

● Review the resolution setting. (P.13)

● Press and hold the player's power (

) and SKIP 

 for at least 2 seconds to reset the 

player. (The player automatically turns off .)

It takes a time to 

start playing.

● It may take some more time to start playing long recorded movies or large sized images.

The image is 

disrupted during 

reverse or fast-

forward playback.

● The image may become disrupted during the change in playback speed when you switch 

speeds.  This is normal and does not indicate a fault.

The TV switches 

input automati-

cally when the 

player is played.

● This is caused by the operation of the HDMI-CEC control function. To disable this function, 

set "HDMI control" to "Off " in the SETUP menu. (P.13)

The TV turns off  

when this player 

is turned off .
This player 

functions when 

the TV’s remote 

control is being 

operated.

中文

2M50101A_ENG.indd   15

2M50101A_ENG.indd   15

10/7/2009   15:50:03

10/7/2009   15:50:03