JVC GR-DF570 User Manual
FEATURES FOR RECORDING
48
EN
MasterPage: Left
These effects let you make pro-style scene
transitions. Use them to spice up the transition
from one scene to the next.
transitions. Use them to spice up the transition
from one scene to the next.
Wipe or Fader works when video recording is
started or stopped.
started or stopped.
1
Set the VIDEO/MEMORY Switch to “VIDEO”.
2
Set the Power Switch to “M”.
3
Set “v” to the desired mode. (
● The WIPE/FADER menu disappears and the
effect is reserved.
● The selected effect indicator appears.
4
Press the Recording Start/Stop Button to
activate the Fade-in/out or Wipe-in/out.
3. The effect indicator
disappears.
NOTES:
● You can extend the length of a Wipe or Fader by
pressing and holding the Recording Start/Stop
Button.
Button.
● Some Wipe/Fader Effects cannot be used with
certain modes of Program AE with special effects.
(See the right column.) In this case, the selected
indicator blinks or goes out.
(See the right column.) In this case, the selected
indicator blinks or goes out.
WIPE/FADER
OFF: Disables the function. (Factory-preset)
FADER–WHITE: Fade in or out with a white
screen.
FADER–BLACK: Fade in or out with a black
screen.
FADER–B.W: Fade in to a colour screen
from a black and white screen, or fade out from
colour to black and white.
colour to black and white.
WIPE–CORNER: Wipe in on a black screen
from the upper right to the lower left corner, or
wipe out from lower left to upper right, leaving a
black screen.
wipe out from lower left to upper right, leaving a
black screen.
WIPE–WINDOW: The scene starts in the
centre of a black screen and wipes in toward the
corners, or comes in from the corners, gradually
wiping out to the centre.
corners, or comes in from the corners, gradually
wiping out to the centre.
WIPE–SLIDE: Wipe in from right to left, or
wipe out from left to right.
WIPE–DOOR: Wipe in as the two halves of
a black screen open to the left and right,
revealing the scene, or wipe out and the black
screen reappears from left and right to cover the
scene.
revealing the scene, or wipe out and the black
screen reappears from left and right to cover the
scene.
WIPE–SCROLL: The scene wipes in from
the bottom to the top of a black screen, or wipes
out from top to bottom, leaving a black screen.
out from top to bottom, leaving a black screen.
WIPE–SHUTTER: Wipe in from the centre
of a black screen toward the top and bottom, or
wipe out from the top and bottom toward the
centre leaving a black screen.
wipe out from the top and bottom toward the
centre leaving a black screen.
1
Set the Power Switch to “M”.
2
Set “r” to the desired mode. (
● The PROGRAM AE menu disappears and the
selected effect is activated.
● The selected effect indicator appears.
To deactivate the selected effect
Select “OFF” in step
Select “OFF” in step
2. The effect indicator
disappears.
NOTES:
● Program AE with special effects can be changed
during recording or during Record-Standby.
● Some modes of Program AE with special effects
cannot be used during Night-Scope.
● When a subject is too bright or reflective, a vertical
streak may appear (smear phenomenon). Smear
phenomenon tends to occur when “SPORTS” or
any mode of “SHUTTER 1/250 – 1/4000” is
selected.
phenomenon tends to occur when “SPORTS” or
any mode of “SHUTTER 1/250 – 1/4000” is
selected.
● Some modes of Program AE with special effects
cannot be used with certain Wipe/Fader effects.
(See the left column.) In this case, the selected
indicator blinks or goes out.
(See the left column.) In this case, the selected
indicator blinks or goes out.
Wipe Or Fader Effects
Program AE With Special Effects
GR-DF570_470PAL.book Page 48 Monday, January 17, 2005 8:27 PM