Manualsbrain.com
  1. Manuals
  2. Brands
  3. JVC
  4. DR-MV5S
  5. User Manual

JVC DR-MV5S User Manual

Download
Page of 88
Masterpage:Right+
EN
 
41
Filename [MV5S_08Basic TimerDub.fm]
EDITING
Page 41Thursday, 24 February 2005  16:05
You can dub programs from a camcorder or DV equipment 
connected to the unit with a DV cable. The unit’s remote control 
allows you the limited control of the connected camcorder or DV 
equipment functions during dubbing.
1
Connect a camcorder or DV equipment to the [DV IN] connector 
on the unit’s front panel.
2
Load a DVD-RAM/RW/R disc on the unit.
3
Press CH +/– to set the channel to “DV”.
● The “DV DUBBING” controller appears on the TV screen.
● If “
” does not appear on the “DV DUBBING” controller, make 
sure the DV equipment is connected correctly.
4
Press w e to select 
, then press ENTER.
5
Press rt to select the desired 
sound track, then press ENTER.
AUDIO 1
: Select this to record the 
original stereo sound played 
back on the connected DV 
equipment.
AUDIO 2
: Select this to record the 
dubbed stereo sound played 
back on the connected DV 
equipment.
MIX
: Select this to record the sound of both “AUDIO 1” and 
“AUDIO 2”.
● Note that this selection is not available when the source program is 
recorded in 16BIT (48 kHz) mode.
6
Press REC MODE repeatedly to set the recording mode.
7
Locate the point from where you want to start dubbing, then 
stop or pause playback by pressing the following buttons on the 
remote control: 4, 5, 3, 8, 9
● To play back in slow speed (1/10 of the normal speed), press 9 to 
pause playback, then press 3 or 5.
● To play back frame-by-frame, press 9 to pause playback, then press 
9 repeatedly. Each press of 9 advances a frame.
● To change the playback direction, press 3 or 5.
8
Press w e to select 
, then press ENTER. The 
dubbing starts.
● Playback on the external DV equipment and recording on the unit 
should start simultaneously.
● When the playback from the beginning is not possible, the “DV 
DUBBING” controller cannot be used. Perform dubbing without using 
the “DV DUBBING” controller. (
墌
below)
● To pause dubbing, press w e to select 
, then press 
ENTER. Both the unit and the external DV equipment pause dubbing. 
Pressing 9 on the unit also works the same way.
● To clear the “DV DUBBING” controller from the TV screen, press 
ON SCREEN.
9
Press 8 on the remote control to stop dubbing.
● Both the unit and the external DV equipment stop dubbing.
NOTES:
● Dubbing copyright guarded programs is not possible.
● Original DV informations such as the recording date and time are not 
recorded.
● The superimposed indication during the operation or dubbing is not 
recorded.
● It is not possible to perform dubbing when “]” lights up on the unit. 
Press VHS] so that “]” lights off.
Performing dubbing without using the “DV DUBBING” 
controller
A Press CH +/– to set the channel to “DV”.
B Press REC MODE repeatedly to set the recording mode.
C Start playback on the external DV equipment slightly before the 
actual point from where you wish to start dubbing.
D Press 7 on the unit to start recording. Or press and hold 7 and 
press 4 on the remote control. The dubbing starts.
E When the dubbing ends, press 8 on the unit, then stop 
playback on the external DV equipment.
DV Dubbing (DVD Deck Only)
NOTES:
● Be sure to use the DV cable VC-VDV 204U for connection.
● When you connect a PC to the [DV IN] connector, we do not 
assure the normal operation of this unit.
VHS/DVD
DVD
VHS
REC
VHS
DVD
DUBBING
CH
DV IN
STANDBY/ON
S-VIDEO
VIDEO
AUDIO
To [DV IN]
DV cable
(VC-VDV 204U)
(not provided)
Camcorder
DV connector
Your unit
DV equipment
MV5S_00.book  Page 41  Thursday, February 24, 2005  4:14 PM