JVC DR-MV5S User Manual
Masterpage:Right+
EN
49
Filename [MV5S_09Advanced Operation.fm]
ADVANCED PLAYBACK
Page 49Thursday, 24 February 2005 14:48
This unit records pictures onto the DVD-RAM discs, instead of
video tapes, then plays back the pictures recorded on the discs.
This makes it possible to achieve high-speed writing and read-out
that has not been possible with conventional VCRs, enabling
recording and playback simultaneously.
video tapes, then plays back the pictures recorded on the discs.
This makes it possible to achieve high-speed writing and read-out
that has not been possible with conventional VCRs, enabling
recording and playback simultaneously.
It is called “Live Memory Playback” to start playback of the program
being recorded, with a time-lag between a recording point and a
playback point, as shown in the figure below.
being recorded, with a time-lag between a recording point and a
playback point, as shown in the figure below.
Not only can this unit play back a program previously recorded
while recording or timer recording another program, but the unit
also allows you to play back from the beginning of a program while
continuing to record the same program.
while recording or timer recording another program, but the unit
also allows you to play back from the beginning of a program while
continuing to record the same program.
Recording/playback Status Display
Press DISPLAY. The current status is superimposed on the TV
screen.
screen.
Live Memory Playback
(DVD Deck Only)
(DVD Deck Only)
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
● Press DVD so that the DVD lamp lights up on the unit.
Playback
(High-speed read-out)
(High-speed read-out)
Recording
(High-speed writing)
High-speed spin
Image figure of DVD-RAM disc
Current recording position
(Recording point)
Recording start point
Current playback point
(Live Memory Playback)
0
30 min.
1 hour
Playback
continues
continues
Recording
continues
continues
Currently elapsed recording time
DISPLAY
Live Memory Playback status can be
checked by pressing DISPLAY to display
the bar meter on the superimpose display.
checked by pressing DISPLAY to display
the bar meter on the superimpose display.
Bar meter display
Superimpose display
MV5S_00.book Page 49 Thursday, February 24, 2005 4:17 PM