JVC HR-XVC33U User Manual

Masterpage:Right

Filename [XVS44U_09Editing.fm]

Page 71

25 August 2003 10:57 am

You can dub selected audio from the DVD or Audio CD disc to a 
MD etc.
However, it is not possible to dub the copy-protected disc.
Example: Dubbing to a MD

A

Connect the optical cable between the unit and the 
digital audio device.

B

A Press OPEN/CLOSE (x) on the DVD deck to open the 

disc tray.

B Place the disc in the disc tray. 

C Press OPEN/CLOSE (x) on the DVD deck to close the 

disc tray.

For the digital audio device
Insert a MD.

C

A Press DVD and select the audio to be dubbed.

B Search for the point where you want to start dubbing 

by pressing PLAY (4), FF (5) or REW (3) then 
press STOP (8).

C Press REW (3) a little, then press PLAY (4) to start 

playback.

D Press PAUSE (9) to pause playback a little before the 

start point.

D

Select the input mode.

E

A Press PLAY (4) to start playback on the DVD deck.

B Start recording on the audio device. 

F

Stop recording on the audio device. Then press STOP (8) 
to stop playback on the DVD deck.

● There may be a discrepancy of several seconds between where 

you intend editing to start, and where it actually starts.

● You can also dub a Video CD or SVCD. Set “DIGITAL AUDIO 

OUTPUT” to “PCM ONLY”. (

● Turn on the TV and select the VCR channel (or AV 

mode).

● Slide the TV/VCR/DVD switch to the right.

Note for connection:
Remove the connector cover 
from the unit and remove the 
protection cap from the 
cable.

Digital audio device
(MD deck etc.)

Optical cable

(not supplied)

DIGITAL AUDIO OUT

XVS44U_01.book  Page 71  Monday, August 25, 2003  11:08 AM