JVC NX-PN7 User Manual
18
Setting the Clock and Timer
Setting the Clock
Set the built-in clock before using the Timer.
• You can set the clock when the unit is turned on or on standby
• You can set the clock when the unit is turned on or on standby
• To exit from the clock setting, press CLOCK/TIMER as required.
• To correct a misentry during the process, press MENU/CANCEL. You can return to the previous
• To correct a misentry during the process, press MENU/CANCEL. You can return to the previous
step.
• If there is a power failure, the clock loses the setting and is reset to “AM12:00.” You need to set
the clock again.
1
Activate the clock setting mode.
“AdjCLOCK” appears then the hour digit of the time indication flashes on
the display.
the display.
• If you have already adjusted the clock before, press the button 2 times to
activate the clock setting mode.
2
1 Adjust the hour while the hour digits of the time indication flashes on the
display.
2 Adjust the minute while the minute digits of the time indication flash on the
display.
3 Select the day of the week.
“CLOCK OK” appears and the built-in clock starts working.
Clock setting
TIMER 1/TIMER 2/TIMER 3
*
Canceled
*
See page 19.
MON DAY
(Monday)
(Monday)
TUE DAY
(Tuesday)
(Tuesday)
WED DAY
(Wednesday)
(Wednesday)
THU DAY
(Thursday)
(Thursday)
FRI DAY
(Friday)
(Friday)
SAT DAY
(Saturday)
(Saturday)
Back to the beginning
SUN DAY
(Sunday)
(Sunday)
NX-PN7[J].BOOK Page 18 Friday, April 18, 2008 3:53 PM