Earthquake Sound IQ-52B User Manual
IQ-52 Amplifier Features
Input Mode: iPod®, RCA, AUX mode select button.
USB: To sync your iPod® with your computer.
S-Video: A standard 4-pin S-Video cable connector.
RCA Input: Used to connect signals from unbalance, -10dBv devices. The white
connector is for the Left input and the red connector is for the Right input.
connector is for the Left input and the red connector is for the Right input.
AUX Input: For maximum flexibility, we have included a stereo “Aux in” input allowing
a secondary audio source (such as your portable music player, computer, etc.).
a secondary audio source (such as your portable music player, computer, etc.).
Volume control: Use the volume control to set the output sound pressure from the IQ-
52 system to proper levels as required.
52 system to proper levels as required.
Vent Port: This port extends the reproduction of very low frequencies.
1/4”
TS Output: Use 3 meter, speaker cable included in the IQ-52 package to connect
the left and right speakers via the 1/4” TS jacks on the back of each speaker.
Power Switch: This Switch turns the device on and off, The on position is indicated
with the marking “•”
with the marking “•”
(a white dot).
Power Receptacle with Fuse Holder: Accepts a detachable 3-circuit line cord in
order to power the device. Holds the external main fuse; 110V = 2A, 220V=1A.
order to power the device. Holds the external main fuse; 110V = 2A, 220V=1A.
Aux AC Output: Power outlet for AirPort Express® or wireless repeater devices.
SUB Out: Supply signal below 80Hz Low Frequency for subwoofer.
Rear Panel Features
Specifications are Subject To Change Without Notice
7