Panasonic SC-HT1000 User Manual
44
RQT7061
IN
FO
Optional connections
≥The equipment connections described are examples.
≥Peripheral equipment and optional cables sold separately unless otherwise indicated.
≥Before connection, turn off all equipment and read the appropriate operating instructions.
≥Peripheral equipment and optional cables sold separately unless otherwise indicated.
≥Before connection, turn off all equipment and read the appropriate operating instructions.
∫ Connecting to the L2 input terminals on the
front of the unit
If the audio output of the other equipment is monaural, connect to L/
MONO. (Both left and right channels are recorded when connected
through L/MONO.)
MONO. (Both left and right channels are recorded when connected
through L/MONO.)
∫ Connecting to the input terminals on the rear of
the unit, L1 or L3
If audio output on the other equipment is monaural, use a stereo-
monaural conversion cable (not included).
monaural conversion cable (not included).
§
By using the S video cable instead of the yellow video cable you may make recordings of higher picture quality.
You need to subscribe to a cable TV or satellite TV service, to enjoy viewing their programming.
≥Consult your service provider regarding appropriate cable TV box or satellite receiver.
≥Select the applicable input on your television to view the output from your cable TV box/satellite receiver through this unit.
≥The signal from the cable TV box or satellite receiver passes through this unit to the television even when this unit is turned off.
≥Change the video input on the television when you want to watch another program while recording.
≥You cannot do a timer recording unless the channel is first selected on the cable TV box or satellite receiver.
≥Consult your service provider regarding appropriate cable TV box or satellite receiver.
≥Select the applicable input on your television to view the output from your cable TV box/satellite receiver through this unit.
≥The signal from the cable TV box or satellite receiver passes through this unit to the television even when this unit is turned off.
≥Change the video input on the television when you want to watch another program while recording.
≥You cannot do a timer recording unless the channel is first selected on the cable TV box or satellite receiver.
[A] One cable TV box/satellite receiver
[Note]
When a home satellite system (Dishnetwork/DSS) is connected,
auto tuning and auto clock setting may not operate properly. Set the
clock manually (
auto tuning and auto clock setting may not operate properly. Set the
clock manually (
➡page 43).
[B] Two cable TV boxes
You can record and view both scrambled and unscrambled channels
if connections are made as shown in the diagram below.
if connections are made as shown in the diagram below.
Connecting other video equipment
REC
ERASE
FM/AM
DVD
REC MODE
PULL-OPEN
CHANNEL