Panasonic SL-PR300 User Manual

14

RQT6087

0 button to 

• The power comes on, and tray DISC1 opens.

0 button again.

• “CD READ DISC” flashes in the information display while the

disc is being read.

• Follow steps 1 and 2, repeating the process for DISC2 and

DISC3, pressing the appropriate OPEN/CLOSE 

0 buttons, and

load CDs in trays DISC2 and DISC3 as well.

• The unit will not respond to commands when a specified tray is

being opened or closed or while the unit is switching CD trays.

• 3-CD changer trays cannot be opened during recording even if

recording from an external source. (This prevents noise and
vibration from lowering the quality of the recording.) 

• The function is set to CD, and DISC1 playback starts from 

track 1.

• The track number is cleared from the music calendar when the

corresponding track has finished playing.

• In this example, playback proceeds through all of the tracks on

DISC1, DISC2 and DISC3, and stops automatically after the
last track on DISC3 has finished playing. This pattern changes
depending on the first disc selected for play, as described in the
following section. 

When one or more CDs are already in the trays.
• Press the button of the CD tray that you want to start playback

from. Continuous play will start playback from the CD in that
tray. 

• When play starts from DISC2

The CDs are played in the sequence of DISC2 

ΠDISC3 Î

DISC1, and then playback stops automatically.

• When play starts from DISC3

The CDs are played in the sequence of DISC3 

ΠDISC1Î

DISC2, and then playback stops automatically.
If one of the trays does not contain a CD, play skips to the CD
in the next tray in the sequence.

Notes
• The DISC SELECTOR 1, 2, and 3 buttons do not function dur-

ing program and random play modes.

• If a tray is opened and closed when it is not the current tray in

use, the unit temporarily assigns the tray a NO DISC status.
When it becomes time to play the disc in this tray, the disc
information is read, and if there is no disc, the unit will move on
to the next tray.

• The total track time does not always match total play time (time

shown in display window) exactly because the playback time
includes lead-in and lead-out spaces as well.

p 

Press the CD Control PLAY 

p button to select the 3-CD changer

function. This automatically starts playback of the disc in the cur-
rently selected tray.

• The currently selected tray is indicated by the red “

“mark

appearing to the immediate right of the CD icon in the display
window. 

p

s

S

Place the CD with its 
label side facing up.

Place an 8-cm CD in the 
center cutout.

SL-PR300PP.fm  Page 14  Thursday, August 30, 2001  1:37 PM