Panasonic SL-PR300 User Manual

25

RQT6087

1REC/REC MUTE to put the CDR in 

• The disc is read and OPC performed if required.
• The remaining recording time on the CD-R or CD-RW disc is

shown in the information display.

The OVER indicator should not be made to light as this may cause
distortion in the recording.
• When CD ANALOG recording is selected, the recording level

is set automatically to the CD in the 3-CD changer.

p button to start 

When recording is complete
Press the CDR Control STOP 

s button to stop. The p indicator in

the display window flashes and operation stops.

Notes
• You cannot record from multiple CDs. If create a program that

changes CDs, a blank track of a few seconds will be added and
recording will stop.

• When  “UNLOCK” is shown in the information display, the

DIGITAL IN terminal is not connected properly to the source
unit.

• Upon completion of recording, the 

p indicator flashes in the

display window. Operating any button while this indicator is
flashing may render the disc being recorded unusable. Always
wait until the 

p indicator stops flashing before proceeding with

the next operation.

• When digital input signals are supplied, they will be recorded in

their original digital form as long as the source signal is not
from a first-generation digital copy (refer to SCMS on
see page 48). There is no need to adjust the recording level.

1REC/REC MUTE button where you 

• To record a silence longer than four seconds, keep pressing the

1REC/REC MUTE button as long as you want.

Notes
•  Four seconds of silence will be recorded regardless of whether

or not the button is held down for fewer or more than four sec-
onds. After the four seconds of silence, the unit stops in the
recording pause mode after the button is released. 

• The REC MUTE function cannot be used at the beginning of

recording started from the recording pause mode 

This feature can be used to record analog sound other than CD
ANALOG.
Located immediately below the CONTROL CD button on the
remote control is a special button (FADE) that allows you to per-
form fade in and fade out of sound at the beginning and end of
tracks when you are recording analog signals. To fade in at the
beginning of a track, put the CDR into the recording pause mode
and press the FADE button to start recording. To fade out at the end
of a track, press the FADE button during the recording process.
The signal will fade out and the CDR will stop in the recording
pause mode. 
• This function cannot be used when recording digital signals.

A track mark specifies the end of one track and the beginning of
another. The unit inserts track marks automatically when the
AUTO TRACK function is turned on, or you can turn off the 
function and insert them manually.
AUTO TRACK function on
• Tracks are automatically marked in the recording. For digital

sources, the track information recorded in the digital source sig-
nal is used. For analog recording, periods of silence (no audio
input from the recording source) are interpreted as track separa-
tions and a track mark is inserted.

OVER

• Press the MENU button first and turn 

the MULTI JOG to adjust the recording 
level. Then press the SET button.

• Adjust the volume in such a way that 

the 0 dB display is not exceeded when 
the loudest sound is applied.

•

REC

REC MUTE

REC

SELECT

OR

MENU

PITCH 

0

CANCEL

PITCH

+

SET

PITCH–

COMPACT DISC RECORDER

RAK-PR300

FADE

SYNCHRO

SL-PR300PP.fm  Page 25  Thursday, August 30, 2001  1:37 PM