Panasonic SL-PR300 User Manual

31

RQT6087

If tracks have already been programmed for the CDs, “LAST P-PG
OK?” is shown in the information display. Press the SET button on
either the remote control or the main unit or press the PLAY button
on the main unit to record the same programmed tracks.
Recording starts.
To program new tracks, press the CANCEL button and then pro-
ceed to step 4.
• If you press the CANCEL button, the playing time remaining

time on the CD-R or CD-RW disc in the CDR is shown in the
information display. 

• The disc source can be selected using the MULTI JOG control

on the main unit or the 

R/F 

buttons on the remote con-

trol.

• When the SET button (main unit/remote control) is pressed, the

programming and track numbers shown in the information dis-
play start flashing.

• After the track is entered, the amount of time remaining on the

CD-R or CD-RW disc is shown in the information display.

• Up to 32 steps can be programmed. The same track may be pro-

grammed more than once.

• Programming ends when 32 steps have been registered or if

there is no more time remaining on the CD-R or CD-RW.

p or 1 REC/REC 

1REC/REC 

When “ADD FINALIZE?” is shown in the information 
window:
• No response (no input) assumes that finalization is to be per-

formed, or you can press the SET button (main unit/remote con-
trol) to confirm that finalization is to be done. Press the
CANCEL button (main unit/remote control) to keep the disc
unfinalized.

Note
• This message will not be shown if the menu FINALIZE func-

tion setting is “ON”. The default setting is “OFF”.

When a blank disc is in the CDR tray, “UPDATE OPC” is shown
following “ADD FINALIZE?”.
The recording process starts.
• Only the tracks selected from the CDs in the 3-CD changer are

recorded.

• Playback starts from the first track selected. The playing time of

the track and the remaining playing time of the CD-R or CD-
RW disc are shown in the information display.

• As high-speed recording is performed (CD-R 4x, CD-RW 2x),

there is no audio output during the recording process.

When recording completes
“STOP DUBBING” flashes and recording automatically stops.

When recorded without canceling "ADD FINALIZE?"
“FINALIZE” is shown in the information window after recording
is stopped and finalization is automatically performed.

To stop the recording at any time
Press the CD Control STOP 

s or CDR Control STOP s button on

the main unit or the 

s (stop) button on the remote control to stop

the recording process. The recording mode is released after “STOP
DUBBING” is shown in the information display.

1. Select the disc.

2. Enter the selection.

1. Select the track.

2. Enter the selection.

SL-PR300PP.fm  Page 31  Thursday, August 30, 2001  1:37 PM